Peugeot 407 3.0 V6 210 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Peugeot 407 3.0 V6 210 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 407 3.0 V6 210 hp ECU
Peugeot 407 (2007) 3.0 V6 210 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 210 to 225 hp (+15 hp, +7%) and torque from 290 to 310 Nm (+20 Nm). ECU — Bosch ME7.4.7. Flashing method: OBD or Bench depending on the unit's protection. A petrol engine built in 2007 — the era before widespread firmware encryption, OBD flash without complications.
Peugeot Sport is the performance division that builds GTi models and track-focused variants. Within Stellantis, Peugeot shares platforms and engines with Citroen, Opel/Vauxhall and DS. The Peugeot range covers compacts, saloons, SUVs, crossovers and commercial vehicles. On high-output Peugeot Sport GTi models, Stage 1 delivers a confident gain. Peugeot's petrol range is shared with Citroen and Opel within Stellantis. The Peugeot Sport GTi models are sporty variants powered by turbo engines.
With supporting hardware, the Peugeot Sport GTi confidently reaches Stage 2. The Peugeot community in France offers a large pool of Stage files. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. High-output Peugeot Sport GTi models sit in the sports segment, with solid headroom for Stage 1.
Frequently asked questions
What is the Stage 1 effect on the Peugeot 407 3.0 V6 210 hp?
Stage 1 for the Peugeot 407 3.0 V6 210 hp adds +15 hp — power increases from 210 to 225 hp (+7%). Torque rises from 290 to 310 Nm (+20 Nm).
What does a Stage 1 remap of the Peugeot 407 3.0 V6 210 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot 407 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +15 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Peugeot 407?
Stage 1 on the powerful Peugeot 407 3.0 V6 210 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Peugeot 407 3.0 V6 210 hp?
Stage 2 for the Peugeot 407 3.0 V6 210 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Peugeot 407 3.0 V6 210 hp use?
The Peugeot 407 3.0 V6 210 hp is fitted with the Bosch ME7.4.7 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Peugeot 407 remain valid after Stage 1?
After remapping the Peugeot 407, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot 407?
Reading and writing via OBD takes 25-30 minutes on the Peugeot 407. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot 407?
Before Stage 1 the original of the Peugeot 407 3.0 V6 210 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot 407 3.0 V6 210 hp cost?
The remap price for the Peugeot 407 3.0 V6 210 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.