Peugeot 308 1.6 THP 200 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Peugeot 308 1.6 THP 200 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 308 1.6 THP 200 hp ECU
Peugeot 308 (2017) 1.6 THP 200 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 200 to 230 hp (+30 hp, +15%) and torque from 275 to 340 Nm (+65 Nm). This engine ships with different ECU variants: Bosch MED17.4.2, Bosch MEVD17.4.2. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 6 configurations · 2 ECU variants. The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Peugeot is part of the Stellantis group (formerly PSA). The Peugeot logo, a lion, has been the brand's traditional symbol since the 1850s. PureTech is Peugeot's signature designation for its petrol turbo engines. On high-output Peugeot Sport GTi models, Stage 1 delivers a confident gain. Peugeot's petrol range is shared with Citroen and Opel within Stellantis.
The Peugeot community in France offers a large pool of Stage files. With supporting hardware, the Peugeot Sport GTi confidently reaches Stage 2. On older-generation Peugeot models, Stage 1 is done via OBD without bench. High-output Peugeot Sport GTi models sit in the sports segment, with solid headroom for Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the Peugeot 308 1.6 THP 200 hp?
After Stage 1 the power of the Peugeot 308 1.6 THP 200 hp rises from 200 to 230 hp, a gain of 30 hp (+15%). Torque rises from 275 to 340 Nm (+65 Nm).
How does Stage 1 differ from stock on the Peugeot 308?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot 308 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Peugeot 308?
The high-output Peugeot 308 1.6 THP 200 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Peugeot 308 1.6 THP 200 hp?
Stage 2 on the Peugeot 308 1.6 THP 200 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Peugeot 308 1.6 THP 200 hp built with?
The Peugeot 308 1.6 THP 200 hp comes with 2 ECU variants: Bosch MED17.4.2, Bosch MEVD17.4.2. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Peugeot 308 remain valid after Stage 1?
After remapping the Peugeot 308, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot 308?
Reading and writing via OBD takes 25-30 minutes on the Peugeot 308. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot 308?
Before Stage 1 the original of the Peugeot 308 1.6 THP 200 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot 308 1.6 THP 200 hp cost?
The remap price for the Peugeot 308 1.6 THP 200 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.