Peugeot 308 1.6 BlueHDI 100 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Peugeot 308 1.6 BlueHDI 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 308 1.6 BlueHDI 100 hp ECU
Peugeot 308 (2013) 1.6 BlueHDI 100 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 100 to 135 hp (+35 hp, +35%) and torque from 254 to 300 Nm (+46 Nm). ECU — Bosch EDC17C60. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. The 2013 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Peugeot is part of the Stellantis group (formerly PSA). The Peugeot logo, a lion, has been the brand's traditional symbol since the 1850s. The Citroen diesel range is fully shared with Peugeot, Opel and DS within Stellantis.
On older-generation Peugeot models, Stage 1 is done via OBD without bench. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. The Peugeot community in France offers a large pool of Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How many horsepower does the Peugeot 308 1.6 BlueHDI 100 hp reach after a remap?
The Stage 1 gain for the Peugeot 308 1.6 BlueHDI 100 hp is 35 hp (+35%) over the stock 100 hp, for a total of 135 hp. Torque rises from 254 to 300 Nm (+46 Nm).
What is Stage 1 chip tuning for the Peugeot 308?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot 308 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Peugeot 308 1.6 BlueHDI 100 hp?
A remap of the Peugeot 308 1.6 BlueHDI 100 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Peugeot 308 1.6 BlueHDI 100 hp?
Stage 2 on the Peugeot 308 1.6 BlueHDI 100 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Peugeot 308 1.6 BlueHDI 100 hp use?
The Peugeot 308 1.6 BlueHDI 100 hp is fitted with the Bosch EDC17C60 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Peugeot 308 remain valid after Stage 1?
After remapping the Peugeot 308, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot 308?
Reading and writing via OBD takes 25-30 minutes on the Peugeot 308. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot 308?
Before Stage 1 the original of the Peugeot 308 1.6 BlueHDI 100 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot 308 1.6 BlueHDI 100 hp cost?
The remap price for the Peugeot 308 1.6 BlueHDI 100 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.