Peugeot 308 1.6 THP 175 hp — Stage 1 file (+33 hp)
hp
Stage 1 file for Peugeot 308 1.6 THP 175 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 308 1.6 THP 175 hp ECU
Peugeot 308 (2007 - 2013) 1.6 THP 175 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 175 to 208 hp (+33 hp, +19%) and torque from 240 to 300 Nm (+60 Nm). This engine ships with different ECU variants: Bosch MED17.4, Bosch MED17.4.2. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2007 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Peugeot is part of the Stellantis group (formerly PSA). The Peugeot logo, a lion, has been the brand's traditional symbol since the 1850s. Peugeot's petrol range is shared with Citroen and Opel within Stellantis. The Peugeot Sport GTi models are sporty variants powered by turbo engines. PureTech is Peugeot's signature designation for its petrol turbo engines.
On Peugeot petrol engines, Stage 1 delivers a noticeable gain. The Peugeot community in France offers a large pool of Stage files. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
What power gain do you get after chip tuning the Peugeot 308 1.6 THP 175 hp?
The Stage 1 gain for the Peugeot 308 1.6 THP 175 hp is 33 hp (+19%) over the stock 175 hp, for a total of 208 hp. Torque rises from 240 to 300 Nm (+60 Nm).
What is Stage 1 chip tuning for the Peugeot 308?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot 308 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +33 hp with no hardware changes.
What is the risk of Stage 1 on the Peugeot 308 1.6 THP 175 hp?
A remap of the Peugeot 308 1.6 THP 175 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Peugeot 308 1.6 THP 175 hp?
Stage 2 on the Peugeot 308 1.6 THP 175 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Peugeot 308 1.6 THP 175 hp built with?
The Peugeot 308 1.6 THP 175 hp comes with 2 ECU variants: Bosch MED17.4, Bosch MED17.4.2. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Peugeot 308 remain valid after Stage 1?
After remapping the Peugeot 308, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot 308?
Reading and writing via OBD takes 25-30 minutes on the Peugeot 308. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot 308?
Before Stage 1 the original of the Peugeot 308 1.6 THP 175 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot 308 1.6 THP 175 hp cost?
The remap price for the Peugeot 308 1.6 THP 175 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.