Peugeot 308 1.6 HDI 90 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Peugeot 308 1.6 HDI 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 308 1.6 HDI 90 hp ECU
Peugeot 308 (2007 - 2013) 1.6 HDI 90 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 90 to 115 hp (+25 hp, +28%) and torque from 215 to 260 Nm (+45 Nm). ECU — Bosch EDC16C34. Flashing method: OBD or Bench depending on the unit's protection. Diesel engines built in 2007 — the era of classic Common Rail without strong encryption.
The Peugeot range covers compacts, saloons, SUVs, crossovers and commercial vehicles. Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Peugeot is part of the Stellantis group (formerly PSA). The factory calibration on Citroen diesels is conservative, leaving headroom for Stage 1.
Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. The Peugeot community in France offers a large pool of Stage files. On naturally aspirated Citroen engines, the main effect is on throttle response. Low-output Citroen engines are city units, and Stage 1 is safe.
Frequently asked questions
How much does the power of the Peugeot 308 1.6 HDI 90 hp increase after Stage 1?
Stage 1 chip tuning on the Peugeot 308 1.6 HDI 90 hp boosts engine output by 25 hp: from 90 to 115 hp. Torque rises from 215 to 260 Nm (+45 Nm).
What changes in the Peugeot 308 ECU after Stage 1?
Stage 1 on the Peugeot 308 1.6 HDI 90 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
Is Stage 1 safe for the low-output Peugeot 308 1.6 HDI 90 hp?
Yes, Stage 1 on the low-output Peugeot 308 1.6 HDI 90 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
How does Stage 2 differ from Stage 1 on the Peugeot 308 1.6 HDI 90 hp?
Stage 2 for the Peugeot 308 1.6 HDI 90 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Peugeot 308 1.6 HDI 90 hp run?
The control unit of the Peugeot 308 1.6 HDI 90 hp is the Bosch EDC16C34. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Peugeot 308?
Stage 1 on the Peugeot 308 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Peugeot 308 1.6 HDI 90 hp done?
The full remap cycle for the Peugeot 308 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Peugeot 308?
The original Peugeot 308 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Peugeot 308 1.6 HDI 90 hp?
The cost of Stage 1 for the Peugeot 308 1.6 HDI 90 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.