Peugeot 301 1.6 VTI 120 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Peugeot 301 1.6 VTI 120 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 301 1.6 VTI 120 hp ECU
Peugeot 301 (2012) 1.6 VTI 120 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 120 to 135 hp (+15 hp, +12%) and torque from 160 to 180 Nm (+20 Nm). This engine ships with different ECU variants: Bosch MEV17.4, Bosch MEV17.4.2. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A petrol engine built in 2012 — a Tricore platform without strong protection; OBD access works.
The Peugeot range covers compacts, saloons, SUVs, crossovers and commercial vehicles. Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Peugeot is part of the Stellantis group (formerly PSA). The Peugeot Sport GTi models are sporty variants powered by turbo engines. PureTech is Peugeot's signature designation for its petrol turbo engines. On Peugeot turbo petrol engines, Stage 1 delivers a noticeable gain.
Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. The Peugeot community in France offers a large pool of Stage files. On Peugeot petrol engines, Stage 1 delivers a noticeable gain. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
How much horsepower does Stage 1 add for the Peugeot 301 1.6 VTI 120 hp?
Stage 1 chip tuning on the Peugeot 301 1.6 VTI 120 hp boosts engine output by 15 hp: from 120 to 135 hp. Torque rises from 160 to 180 Nm (+20 Nm).
What changes in the Peugeot 301 ECU after Stage 1?
Stage 1 on the Peugeot 301 1.6 VTI 120 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +15 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 VTI 120 hp?
Stage 1 on the Peugeot 301 1.6 VTI 120 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Peugeot 301 1.6 VTI 120 hp?
Stage 2 for the Peugeot 301 1.6 VTI 120 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Peugeot 301 1.6 VTI 120 hp have?
The Peugeot 301 1.6 VTI 120 hp has 2 ECU variants: Bosch MEV17.4, Bosch MEV17.4.2. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Peugeot 301?
Stage 1 on the Peugeot 301 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Peugeot 301 1.6 VTI 120 hp done?
The full remap cycle for the Peugeot 301 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Peugeot 301?
The original Peugeot 301 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Peugeot 301 1.6 VTI 120 hp?
The cost of Stage 1 for the Peugeot 301 1.6 VTI 120 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.