Peugeot 3008 1.5 BlueHDI 130 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Peugeot 3008 1.5 BlueHDI 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 3008 1.5 BlueHDI 130 hp ECU
Peugeot 3008 (2016) 1.5 BlueHDI 130 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 130 to 150 hp (+20 hp, +15%) and torque from 300 to 340 Nm (+40 Nm). ECU — Bosch MD1CS003. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. The 2016 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Peugeot is part of the Stellantis group (formerly PSA). The Peugeot logo, a lion, has been the brand's traditional symbol since the 1850s. Mid-generation diesel models use standard OBD read/write.
The Peugeot community in France offers a large pool of Stage files. On Peugeot diesels, Stage 1 delivers a noticeable torque gain. On older-generation Peugeot models, Stage 1 is done via OBD without bench. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
What is the Stage 1 effect on the Peugeot 3008 1.5 BlueHDI 130 hp?
After Stage 1 the power of the Peugeot 3008 1.5 BlueHDI 130 hp rises from 130 to 150 hp, a gain of 20 hp (+15%). Torque rises from 300 to 340 Nm (+40 Nm).
How does Stage 1 differ from stock on the Peugeot 3008?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot 3008 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
What is the risk of Stage 1 on the Peugeot 3008 1.5 BlueHDI 130 hp?
A remap of the Peugeot 3008 1.5 BlueHDI 130 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Peugeot 3008 1.5 BlueHDI 130 hp?
Stage 2 on the Peugeot 3008 1.5 BlueHDI 130 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Peugeot 3008 1.5 BlueHDI 130 hp use?
The Peugeot 3008 1.5 BlueHDI 130 hp is fitted with the Bosch MD1CS003 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Peugeot 3008 remain valid after Stage 1?
After remapping the Peugeot 3008, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot 3008?
Reading and writing via OBD takes 25-30 minutes on the Peugeot 3008. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot 3008?
Before Stage 1 the original of the Peugeot 3008 1.5 BlueHDI 130 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot 3008 1.5 BlueHDI 130 hp cost?
The remap price for the Peugeot 3008 1.5 BlueHDI 130 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.