Peugeot 3008 1.6 HDI 110 hp — Stage 1 file (+26 hp)
hp
Stage 1 file for Peugeot 3008 1.6 HDI 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 3008 1.6 HDI 110 hp ECU
Peugeot 3008 (2009) 1.6 HDI 110 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 110 to 136 hp (+26 hp, +24%) and torque from 240 to 300 Nm (+60 Nm). This engine ships with different ECU variants: Bosch EDC16C08, Bosch EDC16C34, Siemens/Continental SID807EVO. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2009 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Peugeot is part of the Stellantis group (formerly PSA). The Peugeot logo, a lion, has been the brand's traditional symbol since the 1850s. Citroen is a mainstream chip tuning subject among Western European taxi fleets.
On Peugeot diesels, Stage 1 delivers a noticeable torque gain. The Peugeot community in France offers a large pool of Stage files. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How much horsepower does Stage 1 add for the Peugeot 3008 1.6 HDI 110 hp?
After Stage 1 the power of the Peugeot 3008 1.6 HDI 110 hp rises from 110 to 136 hp, a gain of 26 hp (+24%). Torque rises from 240 to 300 Nm (+60 Nm).
How does Stage 1 differ from stock on the Peugeot 3008?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot 3008 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +26 hp with no hardware changes.
What is the risk of Stage 1 on the Peugeot 3008 1.6 HDI 110 hp?
A remap of the Peugeot 3008 1.6 HDI 110 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Peugeot 3008 1.6 HDI 110 hp?
Stage 2 on the Peugeot 3008 1.6 HDI 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Peugeot 3008 1.6 HDI 110 hp built with?
The Peugeot 3008 1.6 HDI 110 hp comes with 3 ECU variants: Bosch EDC16C08, Bosch EDC16C34, Siemens/Continental SID807EVO. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Peugeot 3008 remain valid after Stage 1?
After remapping the Peugeot 3008, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot 3008?
Reading and writing via OBD takes 25-30 minutes on the Peugeot 3008. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot 3008?
Before Stage 1 the original of the Peugeot 3008 1.6 HDI 110 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot 3008 1.6 HDI 110 hp cost?
The remap price for the Peugeot 3008 1.6 HDI 110 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.