Peugeot 208 1.2 VTI Puretech 75 hp — Stage 1 file (+8 hp)
hp
Stage 1 file for Peugeot 208 1.2 VTI Puretech 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 208 1.2 VTI Puretech 75 hp ECU
Peugeot 208 (2019) 1.2 VTI Puretech 75 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 75 to 83 hp (+8 hp, +11%) and torque from 111 to 120 Nm (+9 Nm). This engine ships with different ECU variants: Bosch MG1CS032, Siemens/Continental V56.12. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern petrol engine built in 2019 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Within Stellantis, Peugeot shares platforms and engines with Citroen, Opel/Vauxhall and DS. The Peugeot range covers compacts, saloons, SUVs, crossovers and commercial vehicles. Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Modern Peugeot petrol engines use Tricore and often require Bench. The Peugeot Sport GTi models are sporty variants powered by turbo engines. Low-output Peugeot petrol engines are naturally aspirated city-segment units; the gain is modest.
The Peugeot community in France offers a large pool of Stage files. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. Protection on modern Peugeot models uses Tricore TPROT, so Bench is required. Low-output Citroen engines are city units, and Stage 1 is safe. On naturally aspirated Citroen engines, the main effect is on throttle response.
Frequently asked questions
What is the Stage 1 effect on the Peugeot 208 1.2 VTI Puretech 75 hp?
The Stage 1 gain for the Peugeot 208 1.2 VTI Puretech 75 hp is 8 hp (+11%) over the stock 75 hp, for a total of 83 hp. Torque rises from 111 to 120 Nm (+9 Nm).
What is Stage 1 chip tuning for the Peugeot 208?
Stage 1 chip tuning of the Peugeot 208 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +8 hp with no hardware changes.
What does chip tuning give on the low-output Peugeot 208 1.2 VTI Puretech 75 hp?
Stage 1 on the base Peugeot 208 is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How much does Stage 2 add on the Peugeot 208?
Stage 2 on the Peugeot 208 1.2 VTI Puretech 75 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Peugeot 208 1.2 VTI Puretech 75 hp?
The Peugeot 208 1.2 VTI Puretech 75 hp was fitted with different ECUs depending on the year and trim: Bosch MG1CS032, Siemens/Continental V56.12. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Peugeot 208 warranty after chip tuning?
The factory warranty of the Peugeot 208 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Peugeot 208 take?
On the Peugeot 208 1.2 VTI Puretech 75 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Peugeot 208?
Yes, the original ECU firmware of the Peugeot 208 1.2 VTI Puretech 75 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Peugeot 208?
Stage 1 for the Peugeot 208 1.2 VTI Puretech 75 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.