Peugeot 208 1.2 VTI PureTech 68 hp — Stage 1 file (+5 hp)
hp
Stage 1 file for Peugeot 208 1.2 VTI PureTech 68 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 208 1.2 VTI PureTech 68 hp ECU
Peugeot 208 (2015) 1.2 VTI PureTech 68 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 68 to 73 hp (+5 hp, +7%) and torque from 106 to 111 Nm (+5 Nm). ECU — Siemens/Continental V56.12. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. The 2015 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Peugeot is part of the Stellantis group (formerly PSA). The Peugeot logo, a lion, has been the brand's traditional symbol since the 1850s. Peugeot's petrol range is shared with Citroen and Opel within Stellantis. The Peugeot Sport GTi models are sporty variants powered by turbo engines. PureTech is Peugeot's signature designation for its petrol turbo engines.
On older-generation Peugeot models, Stage 1 is done via OBD without bench. The Peugeot community in France offers a large pool of Stage files. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. Low-output Citroen engines are city units, and Stage 1 is safe. On naturally aspirated Citroen engines, the main effect is on throttle response.
Frequently asked questions
How much horsepower does Stage 1 add for the Peugeot 208 1.2 VTI PureTech 68 hp?
The Stage 1 gain for the Peugeot 208 1.2 VTI PureTech 68 hp is 5 hp (+7%) over the stock 68 hp, for a total of 73 hp. Torque rises from 106 to 111 Nm (+5 Nm).
What is Stage 1 chip tuning for the Peugeot 208?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot 208 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +5 hp with no hardware changes.
Is Stage 1 worth doing on the base Peugeot 208?
Stage 1 on the base Peugeot 208 is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Peugeot 208 1.2 VTI PureTech 68 hp?
Stage 2 on the Peugeot 208 1.2 VTI PureTech 68 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Peugeot 208 1.2 VTI PureTech 68 hp use?
The Peugeot 208 1.2 VTI PureTech 68 hp is fitted with the Siemens/Continental V56.12 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Peugeot 208 remain valid after Stage 1?
After remapping the Peugeot 208, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot 208?
Reading and writing via OBD takes 25-30 minutes on the Peugeot 208. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot 208?
Before Stage 1 the original of the Peugeot 208 1.2 VTI PureTech 68 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot 208 1.2 VTI PureTech 68 hp cost?
The remap price for the Peugeot 208 1.2 VTI PureTech 68 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.