Peugeot 208 1.2 VTI PureTech 68 hp — Stage 1 file (+5 hp)
hp
Stage 1 file for Peugeot 208 1.2 VTI PureTech 68 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 208 1.2 VTI PureTech 68 hp ECU
Peugeot 208 (2012) 1.2 VTI PureTech 68 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 68 to 73 hp (+5 hp, +7%) and torque from 106 to 111 Nm (+5 Nm). ECU — Siemens/Continental V56.12. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. A petrol engine built in 2012 — a Tricore platform without strong protection; OBD access works.
Peugeot Sport is the performance division that builds GTi models and track-focused variants. Within Stellantis, Peugeot shares platforms and engines with Citroen, Opel/Vauxhall and DS. The Peugeot range covers compacts, saloons, SUVs, crossovers and commercial vehicles. Low-output Peugeot petrol engines are naturally aspirated city-segment units; the gain is modest. Peugeot's petrol range is shared with Citroen and Opel within Stellantis. The Peugeot Sport GTi models are sporty variants powered by turbo engines.
On older-generation Peugeot models, Stage 1 is done via OBD without bench. The Peugeot community in France offers a large pool of Stage files. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. On naturally aspirated Citroen engines, the main effect is on throttle response. Low-output Citroen engines are city units, and Stage 1 is safe.
Frequently asked questions
How much does the power of the Peugeot 208 1.2 VTI PureTech 68 hp increase after Stage 1?
Stage 1 for the Peugeot 208 1.2 VTI PureTech 68 hp adds +5 hp — power increases from 68 to 73 hp (+7%). Torque rises from 106 to 111 Nm (+5 Nm).
What does a Stage 1 remap of the Peugeot 208 1.2 VTI PureTech 68 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot 208 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +5 hp with no hardware changes.
Is Stage 1 worth doing on the base Peugeot 208?
Yes, Stage 1 on the low-output Peugeot 208 1.2 VTI PureTech 68 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Peugeot 208 1.2 VTI PureTech 68 hp?
Stage 2 for the Peugeot 208 1.2 VTI PureTech 68 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Peugeot 208 1.2 VTI PureTech 68 hp use?
The Peugeot 208 1.2 VTI PureTech 68 hp is fitted with the Siemens/Continental V56.12 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Peugeot 208 remain valid after Stage 1?
After remapping the Peugeot 208, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot 208?
Reading and writing via OBD takes 25-30 minutes on the Peugeot 208. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot 208?
Before Stage 1 the original of the Peugeot 208 1.2 VTI PureTech 68 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot 208 1.2 VTI PureTech 68 hp cost?
The remap price for the Peugeot 208 1.2 VTI PureTech 68 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.