Peugeot 2008 1.2 THP Puretech GPF 100 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Peugeot 2008 1.2 THP Puretech GPF 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 2008 1.2 THP Puretech GPF 100 hp ECU
Peugeot 2008 (2019) 1.2 THP Puretech GPF 100 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 100 to 130 hp (+30 hp, +30%) and torque from 205 to 240 Nm (+35 Nm). This engine ships with different ECU variants: Bosch MG1CS032, Siemens/Continental VD56.1. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern petrol engine built in 2019 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Within Stellantis, Peugeot shares platforms and engines with Citroen, Opel/Vauxhall and DS. The Peugeot range covers compacts, saloons, SUVs, crossovers and commercial vehicles. Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. PureTech is Peugeot's signature designation for its petrol turbo engines. Peugeot's petrol range is shared with Citroen and Opel within Stellantis. Modern Peugeot petrol engines use Tricore and often require Bench.
Protection on modern Peugeot models uses Tricore TPROT, so Bench is required. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. The Peugeot community in France offers a large pool of Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How much horsepower does Stage 1 add for the Peugeot 2008 1.2 THP Puretech GPF 100 hp?
The Stage 1 gain for the Peugeot 2008 1.2 THP Puretech GPF 100 hp is 30 hp (+30%) over the stock 100 hp, for a total of 130 hp. Torque rises from 205 to 240 Nm (+35 Nm).
What is Stage 1 chip tuning for the Peugeot 2008?
Stage 1 chip tuning of the Peugeot 2008 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +30 hp with no hardware changes.
Can you do Stage 1 on the Peugeot 2008 1.2 THP Puretech GPF 100 hp?
Yes, Stage 1 for the Peugeot 2008 1.2 THP Puretech GPF 100 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Peugeot 2008?
Stage 2 on the Peugeot 2008 1.2 THP Puretech GPF 100 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Peugeot 2008 1.2 THP Puretech GPF 100 hp?
The Peugeot 2008 1.2 THP Puretech GPF 100 hp was fitted with different ECUs depending on the year and trim: Bosch MG1CS032, Siemens/Continental VD56.1. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Peugeot 2008 warranty after chip tuning?
The factory warranty of the Peugeot 2008 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Peugeot 2008 take?
On the Peugeot 2008 1.2 THP Puretech GPF 100 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Peugeot 2008?
Yes, the original ECU firmware of the Peugeot 2008 1.2 THP Puretech GPF 100 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Peugeot 2008?
Stage 1 for the Peugeot 2008 1.2 THP Puretech GPF 100 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.