Peugeot 2008 1.4 HDI 68 hp — Stage 1 file (+22 hp)
hp
Stage 1 file for Peugeot 2008 1.4 HDI 68 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 2008 1.4 HDI 68 hp ECU
Peugeot 2008 (2013) 1.4 HDI 68 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 68 to 90 hp (+22 hp, +32%) and torque from 160 to 210 Nm (+50 Nm). This engine ships with different ECU variants: Bosch EDC16C08, Bosch EDC16C34, Bosch EDC17C10, Siemens/Continental SID806. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 4 ECU variants. The 2013 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Within Stellantis, Peugeot shares platforms and engines with Citroen, Opel/Vauxhall and DS. The Peugeot range covers compacts, saloons, SUVs, crossovers and commercial vehicles. Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Citroen is a mainstream chip tuning subject among Western European taxi fleets.
The Peugeot community in France offers a large pool of Stage files. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. On older-generation Peugeot models, Stage 1 is done via OBD without bench. Low-output Citroen engines are city units, and Stage 1 is safe. On naturally aspirated Citroen engines, the main effect is on throttle response.
Frequently asked questions
How much does the power of the Peugeot 2008 1.4 HDI 68 hp increase after Stage 1?
After Stage 1 the power of the Peugeot 2008 1.4 HDI 68 hp rises from 68 to 90 hp, a gain of 22 hp (+32%). Torque rises from 160 to 210 Nm (+50 Nm).
How does Stage 1 differ from stock on the Peugeot 2008?
Stage 1 chip tuning of the Peugeot 2008 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +22 hp with no hardware changes.
What does chip tuning give on the low-output Peugeot 2008 1.4 HDI 68 hp?
Stage 1 on the base Peugeot 2008 is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How much does Stage 2 add on the Peugeot 2008?
Stage 2 on the Peugeot 2008 1.4 HDI 68 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Peugeot 2008 1.4 HDI 68 hp?
The Peugeot 2008 1.4 HDI 68 hp was fitted with different ECUs depending on the year and trim: Bosch EDC16C08, Bosch EDC16C34, Bosch EDC17C10, Siemens/Continental SID806. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Peugeot 2008 warranty after chip tuning?
The factory warranty of the Peugeot 2008 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Peugeot 2008 take?
On the Peugeot 2008 1.4 HDI 68 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Peugeot 2008?
Yes, the original ECU firmware of the Peugeot 2008 1.4 HDI 68 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Peugeot 2008?
Stage 1 for the Peugeot 2008 1.4 HDI 68 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.