Pagani Zonda 7.0i (C12-S) 550 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Pagani Zonda 7.0i (C12-S) 550 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Pagani Zonda 7.0i (C12-S) 550 hp ECU
Pagani Zonda (1999-) 7.0i (C12-S) 550 hp — luxury petrol engine of the passenger segment of the Pagani Automobili group (Италия, 1992). Stage 1 chip tuning raises power from 550 to 575 hp (+25 hp, +5%) and torque from 750 to 780 Nm (+30 Nm). The 1999 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Pagani is an Italian hypercar manufacturer, founded in 1992 by Horacio Pagani. Pagani uses Mercedes-AMG engines (V12 BiTurbo). The Zonda and Huayra are Pagani's iconic models. Pagani's petrol range uses Mercedes-AMG V12 BiTurbo engines. Pagani sits at the top of the hypercar segment, with track-focused calibration.
Pagani occupies the ultra-premium segment, with bespoke track calibrations. Top-tier Pagani engines belong to the hypercar segment.
Frequently asked questions
How many horsepower does the Pagani Zonda 7.0i (C12-S) 550 hp reach after a remap?
After Stage 1 the power of the Pagani Zonda 7.0i (C12-S) 550 hp rises from 550 to 575 hp, a gain of 25 hp (+5%). Torque rises from 750 to 780 Nm (+30 Nm).
How does Stage 1 differ from stock on the Pagani Zonda?
Stage 1 on the Pagani Zonda 7.0i (C12-S) 550 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
What does Stage 1 give on the top-spec Pagani Zonda 7.0i (C12-S) 550 hp?
Stage 1 for the Pagani Zonda 7.0i (C12-S) 550 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How does Stage 2 differ from Stage 1 on the Pagani Zonda 7.0i (C12-S) 550 hp?
Stage 2 on the Pagani Zonda 7.0i (C12-S) 550 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Pagani Zonda?
Stage 1 on the Pagani Zonda voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Pagani Zonda 7.0i (C12-S) 550 hp done?
The full remap cycle for the Pagani Zonda — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Pagani Zonda?
The original Pagani Zonda ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Pagani Zonda 7.0i (C12-S) 550 hp?
The cost of Stage 1 for the Pagani Zonda 7.0i (C12-S) 550 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.