Opel Vivaro 2.0 BlueHDI EU6d 180 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Opel Vivaro 2.0 BlueHDI EU6d 180 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Vivaro 2.0 BlueHDI EU6d 180 hp ECU
Opel Vivaro (2019) 2.0 BlueHDI EU6d 180 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 180 to 210 hp (+30 hp, +17%) and torque from 400 to 450 Nm (+50 Nm). ECU — Delphi DCM7.1A. Flashing method: OBD or Bench depending on the unit's protection. A modern diesel built in 2019 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
Opel is a German carmaker from Russelsheim, founded in 1862 (originally making sewing machines). Opel has been part of the Stellantis group since 2017 (formerly GM Europe). Opel and Vauxhall (UK) are the same line-up under different names. DPF/SCR with AdBlue (BlueHDi) is standard on Euro-6 Citroen diesels.
On Opel diesels, Stage 1 delivers a noticeable torque gain. Within Stellantis, ECUs are standardised, so Opel files (from 2017 on) often work on Peugeot/Citroen. Protection on modern Opel models uses Tricore TPROT, so Bench is required. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
What is the Stage 1 effect on the Opel Vivaro 2.0 BlueHDI EU6d 180 hp?
After Stage 1 the power of the Opel Vivaro 2.0 BlueHDI EU6d 180 hp rises from 180 to 210 hp, a gain of 30 hp (+17%). Torque rises from 400 to 450 Nm (+50 Nm).
How does Stage 1 differ from stock on the Opel Vivaro?
Stage 1 is a software optimization of the factory ECU firmware of the Opel Vivaro with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Opel Vivaro 2.0 BlueHDI EU6d 180 hp?
A remap of the Opel Vivaro 2.0 BlueHDI EU6d 180 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Opel Vivaro 2.0 BlueHDI EU6d 180 hp?
Stage 2 on the Opel Vivaro 2.0 BlueHDI EU6d 180 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Opel Vivaro 2.0 BlueHDI EU6d 180 hp use?
The Opel Vivaro 2.0 BlueHDI EU6d 180 hp is fitted with the Delphi DCM7.1A ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Opel Vivaro remain valid after Stage 1?
After remapping the Opel Vivaro, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Opel Vivaro?
Reading and writing via OBD takes 25-30 minutes on the Opel Vivaro. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Opel Vivaro?
Before Stage 1 the original of the Opel Vivaro 2.0 BlueHDI EU6d 180 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Opel Vivaro 2.0 BlueHDI EU6d 180 hp cost?
The remap price for the Opel Vivaro 2.0 BlueHDI EU6d 180 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.