Opel Vivaro 1.5 Turbo D 120 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Opel Vivaro 1.5 Turbo D 120 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Vivaro 1.5 Turbo D 120 hp ECU
Opel Vivaro (2019) 1.5 Turbo D 120 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 120 to 150 hp (+30 hp, +25%) and torque from 300 to 340 Nm (+40 Nm). ECU — Bosch MD1CS003. Flashing method: OBD or Bench depending on the unit's protection. A 2019 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.
Before 2017, Opel shared platforms with Chevrolet and Buick as part of GM. Opel is a German carmaker from Russelsheim, founded in 1862 (originally making sewing machines). Opel has been part of the Stellantis group since 2017 (formerly GM Europe). The factory calibration on Citroen diesels is conservative, leaving headroom for Stage 1.
The Opel community in Germany and the UK generates a large volume of Stage files. Older Opel models (pre-2017) share ECUs with Chevrolet, requiring a different toolset. On Opel diesels, Stage 1 delivers a noticeable torque gain. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
How much horsepower does Stage 1 add for the Opel Vivaro 1.5 Turbo D 120 hp?
Stage 1 chip tuning on the Opel Vivaro 1.5 Turbo D 120 hp boosts engine output by 30 hp: from 120 to 150 hp. Torque rises from 300 to 340 Nm (+40 Nm).
What changes in the Opel Vivaro ECU after Stage 1?
Stage 1 on the Opel Vivaro 1.5 Turbo D 120 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.5 Turbo D 120 hp?
Stage 1 on the Opel Vivaro 1.5 Turbo D 120 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Opel Vivaro 1.5 Turbo D 120 hp?
Stage 2 for the Opel Vivaro 1.5 Turbo D 120 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Opel Vivaro 1.5 Turbo D 120 hp run?
The control unit of the Opel Vivaro 1.5 Turbo D 120 hp is the Bosch MD1CS003. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Opel Vivaro?
Stage 1 on the Opel Vivaro voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Opel Vivaro 1.5 Turbo D 120 hp done?
The full remap cycle for the Opel Vivaro — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Opel Vivaro?
The original Opel Vivaro ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Opel Vivaro 1.5 Turbo D 120 hp?
The cost of Stage 1 for the Opel Vivaro 1.5 Turbo D 120 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.