Opel Vivaro 1.6 CDTI (opel-vivaro) 95 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Opel Vivaro 1.6 CDTI (opel-vivaro) 95 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Vivaro 1.6 CDTI (opel-vivaro) 95 hp ECU
Opel Vivaro (2015) 1.6 CDTI (opel-vivaro) 95 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 95 to 145 hp (+50 hp, +53%) and torque from 260 to 350 Nm (+90 Nm). This engine ships with different ECU variants: Bosch DCU17PC42, Bosch EDC17C42, Bosch EDC17C84. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. A diesel built in 2015 — the Tricore ECU era; OBD flash works on most production revisions.
Opel OPC is the performance division, producing high-output turbo versions. Opel shares platforms with Peugeot, Citroen and DS within Stellantis since 2017. Before 2017, Opel shared platforms with Chevrolet and Buick as part of GM. Citroen is a mainstream chip tuning subject among Western European taxi fleets.
Within Stellantis, ECUs are standardised, so Opel files (from 2017 on) often work on Peugeot/Citroen. The Opel community in Germany and the UK generates a large volume of Stage files. On older-generation Opel models, Stage 1 is done via OBD without bench. On naturally aspirated Citroen engines, the main effect is on throttle response. Low-output Citroen engines are city units, and Stage 1 is safe.
Frequently asked questions
How many horsepower does the Opel Vivaro 1.6 CDTI (opel-vivaro) 95 hp reach after a remap?
Stage 1 chip tuning on the Opel Vivaro 1.6 CDTI (opel-vivaro) 95 hp boosts engine output by 50 hp: from 95 to 145 hp. Torque rises from 260 to 350 Nm (+90 Nm).
What changes in the Opel Vivaro ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Opel Vivaro with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +50 hp with no hardware changes.
Is Stage 1 worth doing on the base Opel Vivaro?
Yes, Stage 1 on the low-output Opel Vivaro 1.6 CDTI (opel-vivaro) 95 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Opel Vivaro 1.6 CDTI (opel-vivaro) 95 hp?
Stage 2 for the Opel Vivaro 1.6 CDTI (opel-vivaro) 95 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Opel Vivaro 1.6 CDTI (opel-vivaro) 95 hp built with?
The Opel Vivaro 1.6 CDTI (opel-vivaro) 95 hp comes with 3 ECU variants: Bosch DCU17PC42, Bosch EDC17C42, Bosch EDC17C84. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Opel Vivaro remain valid after Stage 1?
After remapping the Opel Vivaro, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Opel Vivaro?
Reading and writing via OBD takes 25-30 minutes on the Opel Vivaro. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Opel Vivaro?
Before Stage 1 the original of the Opel Vivaro 1.6 CDTI (opel-vivaro) 95 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Opel Vivaro 1.6 CDTI (opel-vivaro) 95 hp cost?
The remap price for the Opel Vivaro 1.6 CDTI (opel-vivaro) 95 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.