Opel Vivaro 1.6 CDTI 115 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Opel Vivaro 1.6 CDTI 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Vivaro 1.6 CDTI 115 hp ECU
Opel Vivaro (2015) 1.6 CDTI 115 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 115 to 145 hp (+30 hp, +26%) and torque from 320 to 400 Nm (+80 Nm). ECU — Bosch EDC17C42. Flashing method: OBD or Bench depending on the unit's protection. The 2015 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Opel is a German carmaker from Russelsheim, founded in 1862 (originally making sewing machines). Opel has been part of the Stellantis group since 2017 (formerly GM Europe). Opel and Vauxhall (UK) are the same line-up under different names. The Citroen diesel range is fully shared with Peugeot, Opel and DS within Stellantis.
On Opel diesels, Stage 1 delivers a noticeable torque gain. Within Stellantis, ECUs are standardised, so Opel files (from 2017 on) often work on Peugeot/Citroen. On older-generation Opel models, Stage 1 is done via OBD without bench. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
What is the Stage 1 effect on the Opel Vivaro 1.6 CDTI 115 hp?
The Stage 1 gain for the Opel Vivaro 1.6 CDTI 115 hp is 30 hp (+26%) over the stock 115 hp, for a total of 145 hp. Torque rises from 320 to 400 Nm (+80 Nm).
What is Stage 1 chip tuning for the Opel Vivaro?
Stage 1 is a software optimization of the factory ECU firmware of the Opel Vivaro with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Opel Vivaro 1.6 CDTI 115 hp?
A remap of the Opel Vivaro 1.6 CDTI 115 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Opel Vivaro 1.6 CDTI 115 hp?
Stage 2 on the Opel Vivaro 1.6 CDTI 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Opel Vivaro 1.6 CDTI 115 hp use?
The Opel Vivaro 1.6 CDTI 115 hp is fitted with the Bosch EDC17C42 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Opel Vivaro remain valid after Stage 1?
After remapping the Opel Vivaro, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Opel Vivaro?
Reading and writing via OBD takes 25-30 minutes on the Opel Vivaro. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Opel Vivaro?
Before Stage 1 the original of the Opel Vivaro 1.6 CDTI 115 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Opel Vivaro 1.6 CDTI 115 hp cost?
The remap price for the Opel Vivaro 1.6 CDTI 115 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.