Opel Vivaro 2.0 CDTI 115 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Opel Vivaro 2.0 CDTI 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Vivaro 2.0 CDTI 115 hp ECU
Opel Vivaro (2003) 2.0 CDTI 115 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 115 to 145 hp (+30 hp, +26%) and torque from 290 to 380 Nm (+90 Nm). This engine ships with different ECU variants: Bosch EDC17C11, Bosch EDC17C42. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2003 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Opel is a German carmaker from Russelsheim, founded in 1862 (originally making sewing machines). Opel has been part of the Stellantis group since 2017 (formerly GM Europe). Opel and Vauxhall (UK) are the same line-up under different names. On older Citroen HDi engines, Stage 1 goes in over OBD with no complications.
The Opel community in Germany and the UK generates a large volume of Stage files. On Opel diesels, Stage 1 delivers a noticeable torque gain. Older Opel models (pre-2017) share ECUs with Chevrolet, requiring a different toolset. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
What is the Stage 1 effect on the Opel Vivaro 2.0 CDTI 115 hp?
After Stage 1 the power of the Opel Vivaro 2.0 CDTI 115 hp rises from 115 to 145 hp, a gain of 30 hp (+26%). Torque rises from 290 to 380 Nm (+90 Nm).
How does Stage 1 differ from stock on the Opel Vivaro?
Stage 1 is a software optimization of the factory ECU firmware of the Opel Vivaro with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Opel Vivaro 2.0 CDTI 115 hp?
A remap of the Opel Vivaro 2.0 CDTI 115 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Opel Vivaro 2.0 CDTI 115 hp?
Stage 2 on the Opel Vivaro 2.0 CDTI 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Opel Vivaro 2.0 CDTI 115 hp built with?
The Opel Vivaro 2.0 CDTI 115 hp comes with 2 ECU variants: Bosch EDC17C11, Bosch EDC17C42. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Opel Vivaro remain valid after Stage 1?
After remapping the Opel Vivaro, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Opel Vivaro?
Reading and writing via OBD takes 25-30 minutes on the Opel Vivaro. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Opel Vivaro?
Before Stage 1 the original of the Opel Vivaro 2.0 CDTI 115 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Opel Vivaro 2.0 CDTI 115 hp cost?
The remap price for the Opel Vivaro 2.0 CDTI 115 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.