Opel Movano 2.2 CDTI 120 hp — Stage 1 file (+75 hp)
hp
Stage 1 file for Opel Movano 2.2 CDTI 120 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Movano 2.2 CDTI 120 hp ECU
Opel Movano (2021) 2.2 CDTI 120 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 120 to 195 hp (+75 hp, +62%) and torque from 310 to 430 Nm (+120 Nm). ECU — Delphi DCM7.1B. Flashing method: OBD or Bench depending on the unit's protection. A 2021 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.
Opel OPC is the performance division, producing high-output turbo versions. Opel shares platforms with Peugeot, Citroen and DS within Stellantis since 2017. Before 2017, Opel shared platforms with Chevrolet and Buick as part of GM. On modern Citroen diesels (encrypted BlueHDi), Bench is often needed.
The Opel community in Germany and the UK generates a large volume of Stage files. Older Opel models (pre-2017) share ECUs with Chevrolet, requiring a different toolset. On Opel diesels, Stage 1 delivers a noticeable torque gain. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
How much horsepower does Stage 1 add for the Opel Movano 2.2 CDTI 120 hp?
Stage 1 chip tuning on the Opel Movano 2.2 CDTI 120 hp boosts engine output by 75 hp: from 120 to 195 hp. Torque rises from 310 to 430 Nm (+120 Nm).
What changes in the Opel Movano ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Opel Movano with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +75 hp with no hardware changes.
What is the risk of Stage 1 on the Opel Movano 2.2 CDTI 120 hp?
A remap of the Opel Movano 2.2 CDTI 120 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Opel Movano 2.2 CDTI 120 hp?
Stage 2 for the Opel Movano 2.2 CDTI 120 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Opel Movano 2.2 CDTI 120 hp use?
The Opel Movano 2.2 CDTI 120 hp is fitted with the Delphi DCM7.1B ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Opel Movano remain valid after Stage 1?
After remapping the Opel Movano, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Opel Movano?
Reading and writing via OBD takes 25-30 minutes on the Opel Movano. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Opel Movano?
Before Stage 1 the original of the Opel Movano 2.2 CDTI 120 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Opel Movano 2.2 CDTI 120 hp cost?
The remap price for the Opel Movano 2.2 CDTI 120 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.