Opel Mokka 1.2 Turbo 100 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Opel Mokka 1.2 Turbo 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Mokka 1.2 Turbo 100 hp ECU
Opel Mokka (2020) 1.2 Turbo 100 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 100 to 130 hp (+30 hp, +30%) and torque from 205 to 240 Nm (+35 Nm). This engine ships with different ECU variants: Bosch MG1CS032, Siemens/Continental VD56.1. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A 2020 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Opel has been part of the Stellantis group since 2017 (formerly GM Europe). Opel and Vauxhall (UK) are the same line-up under different names. Opel OPC is the performance division, producing high-output turbo versions. Modern Citroen petrol engines use Tricore ECUs, often requiring Bench. Citroen turbo petrol engines deliver a noticeable gain with Stage 1. The Citroen petrol range is shared with Peugeot and Opel within Stellantis.
Protection on modern Opel models uses Tricore TPROT, so Bench is required. The Opel community in Germany and the UK generates a large volume of Stage files. Older Opel models (pre-2017) share ECUs with Chevrolet, requiring a different toolset. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
How many horsepower does the Opel Mokka 1.2 Turbo 100 hp reach after a remap?
Stage 1 for the Opel Mokka 1.2 Turbo 100 hp adds +30 hp — power increases from 100 to 130 hp (+30%). Torque rises from 205 to 240 Nm (+35 Nm).
What does a Stage 1 remap of the Opel Mokka 1.2 Turbo 100 hp include?
Stage 1 chip tuning of the Opel Mokka is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +30 hp with no hardware changes.
Can you do Stage 1 on the Opel Mokka 1.2 Turbo 100 hp?
Yes, Stage 1 for the Opel Mokka 1.2 Turbo 100 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Opel Mokka?
Stage 2 for the Opel Mokka 1.2 Turbo 100 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Opel Mokka 1.2 Turbo 100 hp?
The Opel Mokka 1.2 Turbo 100 hp was fitted with different ECUs depending on the year and trim: Bosch MG1CS032, Siemens/Continental VD56.1. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Opel Mokka warranty after chip tuning?
The factory warranty of the Opel Mokka does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Opel Mokka take?
On the Opel Mokka 1.2 Turbo 100 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Opel Mokka?
Yes, the original ECU firmware of the Opel Mokka 1.2 Turbo 100 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Opel Mokka?
Stage 1 for the Opel Mokka 1.2 Turbo 100 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.