Opel Mokka 1.4 T 153 hp — Stage 1 file (+17 hp)
hp
Stage 1 file for Opel Mokka 1.4 T 153 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Mokka 1.4 T 153 hp ECU
Opel Mokka (2012) 1.4 T 153 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 153 to 170 hp (+17 hp, +11%) and torque from 200 to 260 Nm (+60 Nm). ECU — Delco E78. Flashing method: OBD or Bench depending on the unit's protection. The 2012 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Opel is a German carmaker from Russelsheim, founded in 1862 (originally making sewing machines). Opel has been part of the Stellantis group since 2017 (formerly GM Europe). Opel and Vauxhall (UK) are the same line-up under different names. The Citroen petrol range is shared with Peugeot and Opel within Stellantis. Citroen turbo petrol engines deliver a noticeable gain with Stage 1. PureTech is Citroen's badge for its turbo petrol engines.
On older-generation Opel models, Stage 1 is done via OBD without bench. The Opel community in Germany and the UK generates a large volume of Stage files. Older Opel models (pre-2017) share ECUs with Chevrolet, requiring a different toolset. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How many horsepower does the Opel Mokka 1.4 T 153 hp reach after a remap?
The Stage 1 gain for the Opel Mokka 1.4 T 153 hp is 17 hp (+11%) over the stock 153 hp, for a total of 170 hp. Torque rises from 200 to 260 Nm (+60 Nm).
What is Stage 1 chip tuning for the Opel Mokka?
Stage 1 is a software optimization of the factory ECU firmware of the Opel Mokka with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +17 hp with no hardware changes.
What is the risk of Stage 1 on the Opel Mokka 1.4 T 153 hp?
A remap of the Opel Mokka 1.4 T 153 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Opel Mokka 1.4 T 153 hp?
Stage 2 on the Opel Mokka 1.4 T 153 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Opel Mokka 1.4 T 153 hp use?
The Opel Mokka 1.4 T 153 hp is fitted with the Delco E78 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Opel Mokka remain valid after Stage 1?
After remapping the Opel Mokka, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Opel Mokka?
Reading and writing via OBD takes 25-30 minutes on the Opel Mokka. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Opel Mokka?
Before Stage 1 the original of the Opel Mokka 1.4 T 153 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Opel Mokka 1.4 T 153 hp cost?
The remap price for the Opel Mokka 1.4 T 153 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.