Opel Meriva 1.7 CDTI S&S 110 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Opel Meriva 1.7 CDTI S&S 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Meriva 1.7 CDTI S&S 110 hp ECU
Opel Meriva (2010) 1.7 CDTI S&S 110 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 110 to 160 hp (+50 hp, +45%) and torque from 260 to 360 Nm (+100 Nm). ECU — Delco E87. Flashing method: OBD or Bench depending on the unit's protection. The 2010 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Opel is a German carmaker from Russelsheim, founded in 1862 (originally making sewing machines). Opel has been part of the Stellantis group since 2017 (formerly GM Europe). Opel and Vauxhall (UK) are the same line-up under different names. Mid-generation diesel models use standard OBD read/write.
Within Stellantis, ECUs are standardised, so Opel files (from 2017 on) often work on Peugeot/Citroen. On older-generation Opel models, Stage 1 is done via OBD without bench. The Opel community in Germany and the UK generates a large volume of Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
What power gain do you get after chip tuning the Opel Meriva 1.7 CDTI S&S 110 hp?
After Stage 1 the power of the Opel Meriva 1.7 CDTI S&S 110 hp rises from 110 to 160 hp, a gain of 50 hp (+45%). Torque rises from 260 to 360 Nm (+100 Nm).
How does Stage 1 differ from stock on the Opel Meriva?
Stage 1 is a software optimization of the factory ECU firmware of the Opel Meriva with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +50 hp with no hardware changes.
What is the risk of Stage 1 on the Opel Meriva 1.7 CDTI S&S 110 hp?
A remap of the Opel Meriva 1.7 CDTI S&S 110 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Opel Meriva 1.7 CDTI S&S 110 hp?
Stage 2 on the Opel Meriva 1.7 CDTI S&S 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Opel Meriva 1.7 CDTI S&S 110 hp use?
The Opel Meriva 1.7 CDTI S&S 110 hp is fitted with the Delco E87 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Opel Meriva remain valid after Stage 1?
After remapping the Opel Meriva, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Opel Meriva?
Reading and writing via OBD takes 25-30 minutes on the Opel Meriva. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Opel Meriva?
Before Stage 1 the original of the Opel Meriva 1.7 CDTI S&S 110 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Opel Meriva 1.7 CDTI S&S 110 hp cost?
The remap price for the Opel Meriva 1.7 CDTI S&S 110 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.