Opel Insignia 2.0 CDTI 195 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Opel Insignia 2.0 CDTI 195 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Insignia 2.0 CDTI 195 hp ECU
Opel Insignia (2013) 2.0 CDTI 195 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 195 to 225 hp (+30 hp, +15%) and torque from 400 to 480 Nm (+80 Nm). ECU — Bosch EDC17CP47. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. A diesel built in 2013 — the Tricore ECU era; OBD flash works on most production revisions.
Opel has been part of the Stellantis group since 2017 (formerly GM Europe). Opel and Vauxhall (UK) are the same line-up under different names. Opel OPC is the performance division, producing high-output turbo versions. The factory calibration on Citroen diesels is conservative, leaving headroom for Stage 1.
On Opel diesels, Stage 1 delivers a noticeable torque gain. Within Stellantis, ECUs are standardised, so Opel files (from 2017 on) often work on Peugeot/Citroen. On older-generation Opel models, Stage 1 is done via OBD without bench. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
What is the Stage 1 effect on the Opel Insignia 2.0 CDTI 195 hp?
Stage 1 chip tuning on the Opel Insignia 2.0 CDTI 195 hp boosts engine output by 30 hp: from 195 to 225 hp. Torque rises from 400 to 480 Nm (+80 Nm).
What changes in the Opel Insignia ECU after Stage 1?
Stage 1 chip tuning of the Opel Insignia is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +30 hp with no hardware changes.
Can you do Stage 1 on the Opel Insignia 2.0 CDTI 195 hp?
Yes, Stage 1 for the Opel Insignia 2.0 CDTI 195 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Opel Insignia?
Stage 2 for the Opel Insignia 2.0 CDTI 195 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECU is fitted to the Opel Insignia 2.0 CDTI 195 hp?
The Opel Insignia 2.0 CDTI 195 hp ECU is the Bosch EDC17CP47. Production versions support OBD access; locked variants require Bench (BDM/JTAG).
What happens to the Opel Insignia warranty after chip tuning?
The factory warranty of the Opel Insignia does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Opel Insignia take?
On the Opel Insignia 2.0 CDTI 195 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Opel Insignia?
Yes, the original ECU firmware of the Opel Insignia 2.0 CDTI 195 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Opel Insignia?
Stage 1 for the Opel Insignia 2.0 CDTI 195 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.