Opel Insignia 2.0 CDTI 163 hp — Stage 1 file (+37 hp)
hp
Stage 1 file for Opel Insignia 2.0 CDTI 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Insignia 2.0 CDTI 163 hp ECU
Opel Insignia (2013) 2.0 CDTI 163 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 163 to 200 hp (+37 hp, +23%) and torque from 350 to 435 Nm (+85 Nm). In the CHIPOK database: 2 configurations. The 2013 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Opel and Vauxhall (UK) are the same line-up under different names. Opel OPC is the performance division, producing high-output turbo versions. Opel shares platforms with Peugeot, Citroen and DS within Stellantis since 2017. Mid-range Citroen diesels are a mainstream chip tuning subject.
Within Stellantis, ECUs are standardised, so Opel files (from 2017 on) often work on Peugeot/Citroen. On older-generation Opel models, Stage 1 is done via OBD without bench. The Opel community in Germany and the UK generates a large volume of Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
What power gain do you get after chip tuning the Opel Insignia 2.0 CDTI 163 hp?
The Stage 1 gain for the Opel Insignia 2.0 CDTI 163 hp is 37 hp (+23%) over the stock 163 hp, for a total of 200 hp. Torque rises from 350 to 435 Nm (+85 Nm).
What is Stage 1 chip tuning for the Opel Insignia?
Stage 1 on the Opel Insignia 2.0 CDTI 163 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +37 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 CDTI 163 hp?
Stage 1 on the Opel Insignia 2.0 CDTI 163 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Opel Insignia 2.0 CDTI 163 hp?
Stage 2 on the Opel Insignia 2.0 CDTI 163 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Opel Insignia?
Stage 1 on the Opel Insignia voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Opel Insignia 2.0 CDTI 163 hp done?
The full remap cycle for the Opel Insignia — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Opel Insignia?
The original Opel Insignia ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Opel Insignia 2.0 CDTI 163 hp?
The cost of Stage 1 for the Opel Insignia 2.0 CDTI 163 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.