Opel Insignia 1.6 T 170 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Opel Insignia 1.6 T 170 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Insignia 1.6 T 170 hp ECU
Opel Insignia (2013) 1.6 T 170 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 170 to 190 hp (+20 hp, +12%) and torque from 280 to 320 Nm (+40 Nm). This engine ships with different ECU variants: Delco E39, Delco E39A, Delco E80. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. A petrol engine built in 2013 — a Tricore platform without strong protection; OBD access works.
Opel has been part of the Stellantis group since 2017 (formerly GM Europe). Opel and Vauxhall (UK) are the same line-up under different names. Opel OPC is the performance division, producing high-output turbo versions. Citroen turbo petrol engines deliver a noticeable gain with Stage 1. PureTech is Citroen's badge for its turbo petrol engines. The Citroen petrol range is shared with Peugeot and Opel within Stellantis.
Within Stellantis, ECUs are standardised, so Opel files (from 2017 on) often work on Peugeot/Citroen. On older-generation Opel models, Stage 1 is done via OBD without bench. The Opel community in Germany and the UK generates a large volume of Stage files. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
What power gain do you get after chip tuning the Opel Insignia 1.6 T 170 hp?
Stage 1 chip tuning on the Opel Insignia 1.6 T 170 hp boosts engine output by 20 hp: from 170 to 190 hp. Torque rises from 280 to 320 Nm (+40 Nm).
What changes in the Opel Insignia ECU after Stage 1?
Stage 1 chip tuning of the Opel Insignia is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +20 hp with no hardware changes.
Can you do Stage 1 on the Opel Insignia 1.6 T 170 hp?
Yes, Stage 1 for the Opel Insignia 1.6 T 170 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Opel Insignia?
Stage 2 for the Opel Insignia 1.6 T 170 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Opel Insignia 1.6 T 170 hp?
The Opel Insignia 1.6 T 170 hp was fitted with different ECUs depending on the year and trim: Delco E39, Delco E39A, Delco E80. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Opel Insignia warranty after chip tuning?
The factory warranty of the Opel Insignia does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Opel Insignia take?
On the Opel Insignia 1.6 T 170 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Opel Insignia?
Yes, the original ECU firmware of the Opel Insignia 1.6 T 170 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Opel Insignia?
Stage 1 for the Opel Insignia 1.6 T 170 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.