Opel Insignia 2.0 CDTI 160 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Opel Insignia 2.0 CDTI 160 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Insignia 2.0 CDTI 160 hp ECU
Opel Insignia (2009) 2.0 CDTI 160 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 160 to 195 hp (+35 hp, +22%) and torque from 350 to 430 Nm (+80 Nm). This engine ships with different ECU variants: Bosch EDC17C18, Bosch EDC17C19, Bosch EDC17C59. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. Diesel engines built in 2009 — the era of classic Common Rail without strong encryption.
Opel has been part of the Stellantis group since 2017 (formerly GM Europe). Opel and Vauxhall (UK) are the same line-up under different names. Opel OPC is the performance division, producing high-output turbo versions. DPF/SCR with AdBlue (BlueHDi) is standard on Euro-6 Citroen diesels.
On Opel diesels, Stage 1 delivers a noticeable torque gain. Older Opel models (pre-2017) share ECUs with Chevrolet, requiring a different toolset. Within Stellantis, ECUs are standardised, so Opel files (from 2017 on) often work on Peugeot/Citroen. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
How much horsepower does Stage 1 add for the Opel Insignia 2.0 CDTI 160 hp?
Stage 1 for the Opel Insignia 2.0 CDTI 160 hp adds +35 hp — power increases from 160 to 195 hp (+22%). Torque rises from 350 to 430 Nm (+80 Nm).
What does a Stage 1 remap of the Opel Insignia 2.0 CDTI 160 hp include?
Stage 1 chip tuning of the Opel Insignia is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +35 hp with no hardware changes.
Can you do Stage 1 on the Opel Insignia 2.0 CDTI 160 hp?
Yes, Stage 1 for the Opel Insignia 2.0 CDTI 160 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Opel Insignia?
Stage 2 for the Opel Insignia 2.0 CDTI 160 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Opel Insignia 2.0 CDTI 160 hp?
The Opel Insignia 2.0 CDTI 160 hp was fitted with different ECUs depending on the year and trim: Bosch EDC17C18, Bosch EDC17C19, Bosch EDC17C59. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Opel Insignia warranty after chip tuning?
The factory warranty of the Opel Insignia does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Opel Insignia take?
On the Opel Insignia 2.0 CDTI 160 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Opel Insignia?
Yes, the original ECU firmware of the Opel Insignia 2.0 CDTI 160 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Opel Insignia?
Stage 1 for the Opel Insignia 2.0 CDTI 160 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.