Opel Grandland X 1.2 THP Puretech 130 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Opel Grandland X 1.2 THP Puretech 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Grandland X 1.2 THP Puretech 130 hp ECU
Opel Grandland X (2017) 1.2 THP Puretech 130 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 130 to 145 hp (+15 hp, +12%) and torque from 230 to 275 Nm (+45 Nm). ECU — Valeo VD46.1. Flashing method: OBD or Bench depending on the unit's protection. The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Opel and Vauxhall (UK) are the same line-up under different names. Opel OPC is the performance division, producing high-output turbo versions. Opel shares platforms with Peugeot, Citroen and DS within Stellantis since 2017. PureTech is Citroen's badge for its turbo petrol engines. The Citroen petrol range is shared with Peugeot and Opel within Stellantis. Citroen turbo petrol engines deliver a noticeable gain with Stage 1.
Older Opel models (pre-2017) share ECUs with Chevrolet, requiring a different toolset. On Opel petrol engines, Stage 1 delivers a noticeable gain. Within Stellantis, ECUs are standardised, so Opel files (from 2017 on) often work on Peugeot/Citroen. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How much does the power of the Opel Grandland X 1.2 THP Puretech 130 hp increase after Stage 1?
After Stage 1 the power of the Opel Grandland X 1.2 THP Puretech 130 hp rises from 130 to 145 hp, a gain of 15 hp (+12%). Torque rises from 230 to 275 Nm (+45 Nm).
How does Stage 1 differ from stock on the Opel Grandland X?
Stage 1 on the Opel Grandland X 1.2 THP Puretech 130 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +15 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.2 THP Puretech 130 hp?
Stage 1 on the Opel Grandland X 1.2 THP Puretech 130 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Opel Grandland X 1.2 THP Puretech 130 hp?
Stage 2 on the Opel Grandland X 1.2 THP Puretech 130 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Opel Grandland X 1.2 THP Puretech 130 hp run?
The control unit of the Opel Grandland X 1.2 THP Puretech 130 hp is the Valeo VD46.1. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Opel Grandland X?
Stage 1 on the Opel Grandland X voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Opel Grandland X 1.2 THP Puretech 130 hp done?
The full remap cycle for the Opel Grandland X — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Opel Grandland X?
The original Opel Grandland X ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Opel Grandland X 1.2 THP Puretech 130 hp?
The cost of Stage 1 for the Opel Grandland X 1.2 THP Puretech 130 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.