Opel Crossland X 1.2 THP Puretech 130 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Opel Crossland X 1.2 THP Puretech 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Crossland X 1.2 THP Puretech 130 hp ECU
Opel Crossland X (2017) 1.2 THP Puretech 130 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 130 to 145 hp (+15 hp, +12%) and torque from 230 to 275 Nm (+45 Nm). ECU — Valeo VD46.1. Flashing method: OBD or Bench depending on the unit's protection. The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Opel is a German carmaker from Russelsheim, founded in 1862 (originally making sewing machines). Opel has been part of the Stellantis group since 2017 (formerly GM Europe). Opel and Vauxhall (UK) are the same line-up under different names. The Citroen petrol range is shared with Peugeot and Opel within Stellantis. Citroen turbo petrol engines deliver a noticeable gain with Stage 1. PureTech is Citroen's badge for its turbo petrol engines.
Within Stellantis, ECUs are standardised, so Opel files (from 2017 on) often work on Peugeot/Citroen. On older-generation Opel models, Stage 1 is done via OBD without bench. The Opel community in Germany and the UK generates a large volume of Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
What power gain do you get after chip tuning the Opel Crossland X 1.2 THP Puretech 130 hp?
The Stage 1 gain for the Opel Crossland X 1.2 THP Puretech 130 hp is 15 hp (+12%) over the stock 130 hp, for a total of 145 hp. Torque rises from 230 to 275 Nm (+45 Nm).
What is Stage 1 chip tuning for the Opel Crossland X?
Stage 1 is a software optimization of the factory ECU firmware of the Opel Crossland X with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +15 hp with no hardware changes.
What is the risk of Stage 1 on the Opel Crossland X 1.2 THP Puretech 130 hp?
A remap of the Opel Crossland X 1.2 THP Puretech 130 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Opel Crossland X 1.2 THP Puretech 130 hp?
Stage 2 on the Opel Crossland X 1.2 THP Puretech 130 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Opel Crossland X 1.2 THP Puretech 130 hp use?
The Opel Crossland X 1.2 THP Puretech 130 hp is fitted with the Valeo VD46.1 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Opel Crossland X remain valid after Stage 1?
After remapping the Opel Crossland X, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Opel Crossland X?
Reading and writing via OBD takes 25-30 minutes on the Opel Crossland X. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Opel Crossland X?
Before Stage 1 the original of the Opel Crossland X 1.2 THP Puretech 130 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Opel Crossland X 1.2 THP Puretech 130 hp cost?
The remap price for the Opel Crossland X 1.2 THP Puretech 130 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.