Opel Crossland X 1.2 THP Puretech 110 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Opel Crossland X 1.2 THP Puretech 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Crossland X 1.2 THP Puretech 110 hp ECU
Opel Crossland X (2017) 1.2 THP Puretech 110 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 110 to 145 hp (+35 hp, +32%) and torque from 205 to 270 Nm (+65 Nm). This engine ships with different ECU variants: Valeo VD46.1, Siemens/Continental VD56.1, Valeo VD56.1. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Opel is a German carmaker from Russelsheim, founded in 1862 (originally making sewing machines). Opel has been part of the Stellantis group since 2017 (formerly GM Europe). Opel and Vauxhall (UK) are the same line-up under different names. The Citroen petrol range is shared with Peugeot and Opel within Stellantis. Citroen turbo petrol engines deliver a noticeable gain with Stage 1. PureTech is Citroen's badge for its turbo petrol engines.
The Opel community in Germany and the UK generates a large volume of Stage files. Older Opel models (pre-2017) share ECUs with Chevrolet, requiring a different toolset. On Opel petrol engines, Stage 1 delivers a noticeable gain. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How much horsepower does Stage 1 add for the Opel Crossland X 1.2 THP Puretech 110 hp?
The Stage 1 gain for the Opel Crossland X 1.2 THP Puretech 110 hp is 35 hp (+32%) over the stock 110 hp, for a total of 145 hp. Torque rises from 205 to 270 Nm (+65 Nm).
What is Stage 1 chip tuning for the Opel Crossland X?
Stage 1 is a software optimization of the factory ECU firmware of the Opel Crossland X with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Opel Crossland X 1.2 THP Puretech 110 hp?
A remap of the Opel Crossland X 1.2 THP Puretech 110 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Opel Crossland X 1.2 THP Puretech 110 hp?
Stage 2 on the Opel Crossland X 1.2 THP Puretech 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Opel Crossland X 1.2 THP Puretech 110 hp built with?
The Opel Crossland X 1.2 THP Puretech 110 hp comes with 3 ECU variants: Valeo VD46.1, Siemens/Continental VD56.1, Valeo VD56.1. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Opel Crossland X remain valid after Stage 1?
After remapping the Opel Crossland X, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Opel Crossland X?
Reading and writing via OBD takes 25-30 minutes on the Opel Crossland X. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Opel Crossland X?
Before Stage 1 the original of the Opel Crossland X 1.2 THP Puretech 110 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Opel Crossland X 1.2 THP Puretech 110 hp cost?
The remap price for the Opel Crossland X 1.2 THP Puretech 110 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.