Opel Corsa 1.3 CDTI 95 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Opel Corsa 1.3 CDTI 95 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Corsa 1.3 CDTI 95 hp ECU
Opel Corsa (2014) 1.3 CDTI 95 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 95 to 115 hp (+20 hp, +21%) and torque from 190 to 240 Nm (+50 Nm). This engine ships with different ECU variants: Delco E98, Bosch EDC17C18, Bosch EDC17C19, Bosch EDC17C59. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 8 configurations · 4 ECU variants. The 2014 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Opel is a German carmaker from Russelsheim, founded in 1862 (originally making sewing machines). Opel has been part of the Stellantis group since 2017 (formerly GM Europe). Opel and Vauxhall (UK) are the same line-up under different names. The factory calibration on Citroen diesels is conservative, leaving headroom for Stage 1.
The Opel community in Germany and the UK generates a large volume of Stage files. On older-generation Opel models, Stage 1 is done via OBD without bench. Older Opel models (pre-2017) share ECUs with Chevrolet, requiring a different toolset. Low-output Citroen engines are city units, and Stage 1 is safe. On naturally aspirated Citroen engines, the main effect is on throttle response.
Frequently asked questions
What is the Stage 1 effect on the Opel Corsa 1.3 CDTI 95 hp?
After Stage 1 the power of the Opel Corsa 1.3 CDTI 95 hp rises from 95 to 115 hp, a gain of 20 hp (+21%). Torque rises from 190 to 240 Nm (+50 Nm).
How does Stage 1 differ from stock on the Opel Corsa?
Stage 1 is a software optimization of the factory ECU firmware of the Opel Corsa with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Is Stage 1 worth doing on the base Opel Corsa?
Stage 1 on the base Opel Corsa is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Opel Corsa 1.3 CDTI 95 hp?
Stage 2 on the Opel Corsa 1.3 CDTI 95 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Opel Corsa 1.3 CDTI 95 hp built with?
The Opel Corsa 1.3 CDTI 95 hp comes with 4 ECU variants: Delco E98, Bosch EDC17C18, Bosch EDC17C19, Bosch EDC17C59. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Opel Corsa remain valid after Stage 1?
After remapping the Opel Corsa, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Opel Corsa?
Reading and writing via OBD takes 25-30 minutes on the Opel Corsa. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Opel Corsa?
Before Stage 1 the original of the Opel Corsa 1.3 CDTI 95 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Opel Corsa 1.3 CDTI 95 hp cost?
The remap price for the Opel Corsa 1.3 CDTI 95 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.