Opel Combo 1.5 Ecotec D 130 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Opel Combo 1.5 Ecotec D 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Combo 1.5 Ecotec D 130 hp ECU
Opel Combo (2020) 1.5 Ecotec D 130 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 130 to 150 hp (+20 hp, +15%) and torque from 300 to 340 Nm (+40 Nm). ECU — Bosch MD1CS003. Flashing method: OBD or Bench depending on the unit's protection. A 2020 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.
Opel has been part of the Stellantis group since 2017 (formerly GM Europe). Opel and Vauxhall (UK) are the same line-up under different names. Opel OPC is the performance division, producing high-output turbo versions. On modern Citroen diesels (encrypted BlueHDi), Bench is often needed.
Protection on modern Opel models uses Tricore TPROT, so Bench is required. The Opel community in Germany and the UK generates a large volume of Stage files. Older Opel models (pre-2017) share ECUs with Chevrolet, requiring a different toolset. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
How many horsepower does the Opel Combo 1.5 Ecotec D 130 hp reach after a remap?
Stage 1 for the Opel Combo 1.5 Ecotec D 130 hp adds +20 hp — power increases from 130 to 150 hp (+15%). Torque rises from 300 to 340 Nm (+40 Nm).
What does a Stage 1 remap of the Opel Combo 1.5 Ecotec D 130 hp include?
Stage 1 chip tuning of the Opel Combo is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +20 hp with no hardware changes.
Can you do Stage 1 on the Opel Combo 1.5 Ecotec D 130 hp?
Yes, Stage 1 for the Opel Combo 1.5 Ecotec D 130 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Opel Combo?
Stage 2 for the Opel Combo 1.5 Ecotec D 130 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECU is fitted to the Opel Combo 1.5 Ecotec D 130 hp?
The Opel Combo 1.5 Ecotec D 130 hp ECU is the Bosch MD1CS003. Production versions support OBD access; locked variants require Bench (BDM/JTAG).
What happens to the Opel Combo warranty after chip tuning?
The factory warranty of the Opel Combo does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Opel Combo take?
On the Opel Combo 1.5 Ecotec D 130 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Opel Combo?
Yes, the original ECU firmware of the Opel Combo 1.5 Ecotec D 130 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Opel Combo?
Stage 1 for the Opel Combo 1.5 Ecotec D 130 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.