Opel Combo 1.2 Turbo 110 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Opel Combo 1.2 Turbo 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Combo 1.2 Turbo 110 hp ECU
Opel Combo (2020) 1.2 Turbo 110 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 110 to 145 hp (+35 hp, +32%) and torque from 205 to 270 Nm (+65 Nm). ECU — Siemens/Continental VD56.1. Flashing method: OBD or Bench depending on the unit's protection. A modern petrol engine built in 2020 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Opel is a German carmaker from Russelsheim, founded in 1862 (originally making sewing machines). Opel has been part of the Stellantis group since 2017 (formerly GM Europe). Opel and Vauxhall (UK) are the same line-up under different names. Citroen turbo petrol engines deliver a noticeable gain with Stage 1. The Citroen petrol range is shared with Peugeot and Opel within Stellantis. PureTech is Citroen's badge for its turbo petrol engines.
On Opel petrol engines, Stage 1 delivers a noticeable gain. Within Stellantis, ECUs are standardised, so Opel files (from 2017 on) often work on Peugeot/Citroen. Protection on modern Opel models uses Tricore TPROT, so Bench is required. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
What is the Stage 1 effect on the Opel Combo 1.2 Turbo 110 hp?
The Stage 1 gain for the Opel Combo 1.2 Turbo 110 hp is 35 hp (+32%) over the stock 110 hp, for a total of 145 hp. Torque rises from 205 to 270 Nm (+65 Nm).
What is Stage 1 chip tuning for the Opel Combo?
Stage 1 is a software optimization of the factory ECU firmware of the Opel Combo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Opel Combo 1.2 Turbo 110 hp?
A remap of the Opel Combo 1.2 Turbo 110 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Opel Combo 1.2 Turbo 110 hp?
Stage 2 on the Opel Combo 1.2 Turbo 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Opel Combo 1.2 Turbo 110 hp use?
The Opel Combo 1.2 Turbo 110 hp is fitted with the Siemens/Continental VD56.1 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Opel Combo remain valid after Stage 1?
After remapping the Opel Combo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Opel Combo?
Reading and writing via OBD takes 25-30 minutes on the Opel Combo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Opel Combo?
Before Stage 1 the original of the Opel Combo 1.2 Turbo 110 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Opel Combo 1.2 Turbo 110 hp cost?
The remap price for the Opel Combo 1.2 Turbo 110 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.