Opel Combo 1.6 CDTI 90 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Opel Combo 1.6 CDTI 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Combo 1.6 CDTI 90 hp ECU
Opel Combo (2015) 1.6 CDTI 90 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 90 to 140 hp (+50 hp, +56%) and torque from 290 to 350 Nm (+60 Nm). ECU — Bosch EDC17C10. Flashing method: OBD or Bench depending on the unit's protection. A diesel built in 2015 — the Tricore ECU era; OBD flash works on most production revisions.
Before 2017, Opel shared platforms with Chevrolet and Buick as part of GM. Opel is a German carmaker from Russelsheim, founded in 1862 (originally making sewing machines). Opel has been part of the Stellantis group since 2017 (formerly GM Europe). HDi and BlueHDi are Citroen's badges for direct-injection turbo diesels.
Within Stellantis, ECUs are standardised, so Opel files (from 2017 on) often work on Peugeot/Citroen. The Opel community in Germany and the UK generates a large volume of Stage files. On older-generation Opel models, Stage 1 is done via OBD without bench. On naturally aspirated Citroen engines, the main effect is on throttle response. Low-output Citroen engines are city units, and Stage 1 is safe.
Frequently asked questions
What is the Stage 1 effect on the Opel Combo 1.6 CDTI 90 hp?
Stage 1 chip tuning on the Opel Combo 1.6 CDTI 90 hp boosts engine output by 50 hp: from 90 to 140 hp. Torque rises from 290 to 350 Nm (+60 Nm).
What changes in the Opel Combo ECU after Stage 1?
Stage 1 on the Opel Combo 1.6 CDTI 90 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +50 hp with no hardware changes.
Is Stage 1 safe for the low-output Opel Combo 1.6 CDTI 90 hp?
Yes, Stage 1 on the low-output Opel Combo 1.6 CDTI 90 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
How does Stage 2 differ from Stage 1 on the Opel Combo 1.6 CDTI 90 hp?
Stage 2 for the Opel Combo 1.6 CDTI 90 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Opel Combo 1.6 CDTI 90 hp run?
The control unit of the Opel Combo 1.6 CDTI 90 hp is the Bosch EDC17C10. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Opel Combo?
Stage 1 on the Opel Combo voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Opel Combo 1.6 CDTI 90 hp done?
The full remap cycle for the Opel Combo — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Opel Combo?
The original Opel Combo ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Opel Combo 1.6 CDTI 90 hp?
The cost of Stage 1 for the Opel Combo 1.6 CDTI 90 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.