Opel Combo 1.6 CDTI 105 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Opel Combo 1.6 CDTI 105 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Combo 1.6 CDTI 105 hp ECU
Opel Combo (2015) 1.6 CDTI 105 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 105 to 140 hp (+35 hp, +33%) and torque from 290 to 350 Nm (+60 Nm). This engine ships with different ECU variants: Bosch EDC17C10, Bosch EDC17C69. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A diesel built in 2015 — the Tricore ECU era; OBD flash works on most production revisions.
Opel OPC is the performance division, producing high-output turbo versions. Opel shares platforms with Peugeot, Citroen and DS within Stellantis since 2017. Before 2017, Opel shared platforms with Chevrolet and Buick as part of GM. Mid-range Citroen diesels are a mainstream chip tuning subject.
On Opel diesels, Stage 1 delivers a noticeable torque gain. Within Stellantis, ECUs are standardised, so Opel files (from 2017 on) often work on Peugeot/Citroen. On older-generation Opel models, Stage 1 is done via OBD without bench. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
What is the Stage 1 effect on the Opel Combo 1.6 CDTI 105 hp?
Stage 1 for the Opel Combo 1.6 CDTI 105 hp adds +35 hp — power increases from 105 to 140 hp (+33%). Torque rises from 290 to 350 Nm (+60 Nm).
What does a Stage 1 remap of the Opel Combo 1.6 CDTI 105 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Opel Combo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Opel Combo 1.6 CDTI 105 hp?
A remap of the Opel Combo 1.6 CDTI 105 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Opel Combo 1.6 CDTI 105 hp?
Stage 2 for the Opel Combo 1.6 CDTI 105 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Opel Combo 1.6 CDTI 105 hp built with?
The Opel Combo 1.6 CDTI 105 hp comes with 2 ECU variants: Bosch EDC17C10, Bosch EDC17C69. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Opel Combo remain valid after Stage 1?
After remapping the Opel Combo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Opel Combo?
Reading and writing via OBD takes 25-30 minutes on the Opel Combo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Opel Combo?
Before Stage 1 the original of the Opel Combo 1.6 CDTI 105 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Opel Combo 1.6 CDTI 105 hp cost?
The remap price for the Opel Combo 1.6 CDTI 105 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.