Opel Combo 1.3 CDTI 90 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Opel Combo 1.3 CDTI 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Combo 1.3 CDTI 90 hp ECU
Opel Combo (2015) 1.3 CDTI 90 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 90 to 110 hp (+20 hp, +22%) and torque from 200 to 245 Nm (+45 Nm). This engine ships with different ECU variants: Marelli MJD6, Marelli MJD8F3, Marelli MJD9DF. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 6 configurations · 3 ECU variants. The 2015 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Opel is a German carmaker from Russelsheim, founded in 1862 (originally making sewing machines). Opel has been part of the Stellantis group since 2017 (formerly GM Europe). Opel and Vauxhall (UK) are the same line-up under different names. HDi and BlueHDi are Citroen's badges for direct-injection turbo diesels.
Older Opel models (pre-2017) share ECUs with Chevrolet, requiring a different toolset. Within Stellantis, ECUs are standardised, so Opel files (from 2017 on) often work on Peugeot/Citroen. The Opel community in Germany and the UK generates a large volume of Stage files. Low-output Citroen engines are city units, and Stage 1 is safe. On naturally aspirated Citroen engines, the main effect is on throttle response.
Frequently asked questions
How much horsepower does Stage 1 add for the Opel Combo 1.3 CDTI 90 hp?
The Stage 1 gain for the Opel Combo 1.3 CDTI 90 hp is 20 hp (+22%) over the stock 90 hp, for a total of 110 hp. Torque rises from 200 to 245 Nm (+45 Nm).
What is Stage 1 chip tuning for the Opel Combo?
Stage 1 is a software optimization of the factory ECU firmware of the Opel Combo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Is Stage 1 worth doing on the base Opel Combo?
Stage 1 on the base Opel Combo is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Opel Combo 1.3 CDTI 90 hp?
Stage 2 on the Opel Combo 1.3 CDTI 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Opel Combo 1.3 CDTI 90 hp built with?
The Opel Combo 1.3 CDTI 90 hp comes with 3 ECU variants: Marelli MJD6, Marelli MJD8F3, Marelli MJD9DF. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Opel Combo remain valid after Stage 1?
After remapping the Opel Combo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Opel Combo?
Reading and writing via OBD takes 25-30 minutes on the Opel Combo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Opel Combo?
Before Stage 1 the original of the Opel Combo 1.3 CDTI 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Opel Combo 1.3 CDTI 90 hp cost?
The remap price for the Opel Combo 1.3 CDTI 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.