Opel Combo 1.3 CDTI 75 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Opel Combo 1.3 CDTI 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Combo 1.3 CDTI 75 hp ECU
Opel Combo (2011) 1.3 CDTI 75 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 75 to 95 hp (+20 hp, +27%) and torque from 180 to 225 Nm (+45 Nm). This engine ships with different ECU variants: Bosch EDC17C18, Bosch EDC17C19, Bosch EDC17C59. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 6 configurations · 3 ECU variants. A diesel built in 2011 — the Tricore ECU era; OBD flash works on most production revisions.
Opel has been part of the Stellantis group since 2017 (formerly GM Europe). Opel and Vauxhall (UK) are the same line-up under different names. Opel OPC is the performance division, producing high-output turbo versions. DPF/SCR with AdBlue (BlueHDi) is standard on Euro-6 Citroen diesels.
Within Stellantis, ECUs are standardised, so Opel files (from 2017 on) often work on Peugeot/Citroen. The Opel community in Germany and the UK generates a large volume of Stage files. On older-generation Opel models, Stage 1 is done via OBD without bench. On naturally aspirated Citroen engines, the main effect is on throttle response. Low-output Citroen engines are city units, and Stage 1 is safe.
Frequently asked questions
How much does the power of the Opel Combo 1.3 CDTI 75 hp increase after Stage 1?
Stage 1 chip tuning on the Opel Combo 1.3 CDTI 75 hp boosts engine output by 20 hp: from 75 to 95 hp. Torque rises from 180 to 225 Nm (+45 Nm).
What changes in the Opel Combo ECU after Stage 1?
Stage 1 chip tuning of the Opel Combo is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +20 hp with no hardware changes.
What does chip tuning give on the low-output Opel Combo 1.3 CDTI 75 hp?
Yes, Stage 1 on the low-output Opel Combo 1.3 CDTI 75 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
How much does Stage 2 add on the Opel Combo?
Stage 2 for the Opel Combo 1.3 CDTI 75 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Opel Combo 1.3 CDTI 75 hp?
The Opel Combo 1.3 CDTI 75 hp was fitted with different ECUs depending on the year and trim: Bosch EDC17C18, Bosch EDC17C19, Bosch EDC17C59. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Opel Combo warranty after chip tuning?
The factory warranty of the Opel Combo does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Opel Combo take?
On the Opel Combo 1.3 CDTI 75 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Opel Combo?
Yes, the original ECU firmware of the Opel Combo 1.3 CDTI 75 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Opel Combo?
Stage 1 for the Opel Combo 1.3 CDTI 75 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.