Opel Combo 1.3 CDTI 70 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Opel Combo 1.3 CDTI 70 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Combo 1.3 CDTI 70 hp ECU
Opel Combo (2011) 1.3 CDTI 70 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 70 to 90 hp (+20 hp, +29%) and torque from 170 to 225 Nm (+55 Nm). ECU — Marelli MJD6. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. The 2011 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Opel is a German carmaker from Russelsheim, founded in 1862 (originally making sewing machines). Opel has been part of the Stellantis group since 2017 (formerly GM Europe). Opel and Vauxhall (UK) are the same line-up under different names. Citroen is a mainstream chip tuning subject among Western European taxi fleets.
The Opel community in Germany and the UK generates a large volume of Stage files. On older-generation Opel models, Stage 1 is done via OBD without bench. Older Opel models (pre-2017) share ECUs with Chevrolet, requiring a different toolset. Low-output Citroen engines are city units, and Stage 1 is safe. On naturally aspirated Citroen engines, the main effect is on throttle response.
Frequently asked questions
How much does the power of the Opel Combo 1.3 CDTI 70 hp increase after Stage 1?
After Stage 1 the power of the Opel Combo 1.3 CDTI 70 hp rises from 70 to 90 hp, a gain of 20 hp (+29%). Torque rises from 170 to 225 Nm (+55 Nm).
How does Stage 1 differ from stock on the Opel Combo?
Stage 1 is a software optimization of the factory ECU firmware of the Opel Combo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Is Stage 1 worth doing on the base Opel Combo?
Stage 1 on the base Opel Combo is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Opel Combo 1.3 CDTI 70 hp?
Stage 2 on the Opel Combo 1.3 CDTI 70 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Opel Combo 1.3 CDTI 70 hp use?
The Opel Combo 1.3 CDTI 70 hp is fitted with the Marelli MJD6 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Opel Combo remain valid after Stage 1?
After remapping the Opel Combo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Opel Combo?
Reading and writing via OBD takes 25-30 minutes on the Opel Combo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Opel Combo?
Before Stage 1 the original of the Opel Combo 1.3 CDTI 70 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Opel Combo 1.3 CDTI 70 hp cost?
The remap price for the Opel Combo 1.3 CDTI 70 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.