Opel Combo 1.3 CDTI 75 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Opel Combo 1.3 CDTI 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Combo 1.3 CDTI 75 hp ECU
Opel Combo (2002) 1.3 CDTI 75 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 75 to 95 hp (+20 hp, +27%) and torque from 180 to 225 Nm (+45 Nm). This engine ships with different ECU variants: Bosch EDC17C18, Bosch EDC17C19, Bosch EDC17C59. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 6 configurations · 3 ECU variants. Diesel engines built in 2002 — the era of classic Common Rail without strong encryption.
Before 2017, Opel shared platforms with Chevrolet and Buick as part of GM. Opel is a German carmaker from Russelsheim, founded in 1862 (originally making sewing machines). Opel has been part of the Stellantis group since 2017 (formerly GM Europe). On older Citroen HDi engines, Stage 1 goes in over OBD with no complications.
Within Stellantis, ECUs are standardised, so Opel files (from 2017 on) often work on Peugeot/Citroen. Older Opel models (pre-2017) share ECUs with Chevrolet, requiring a different toolset. The Opel community in Germany and the UK generates a large volume of Stage files. On naturally aspirated Citroen engines, the main effect is on throttle response. Low-output Citroen engines are city units, and Stage 1 is safe.
Frequently asked questions
How much horsepower does Stage 1 add for the Opel Combo 1.3 CDTI 75 hp?
Stage 1 for the Opel Combo 1.3 CDTI 75 hp adds +20 hp — power increases from 75 to 95 hp (+27%). Torque rises from 180 to 225 Nm (+45 Nm).
What does a Stage 1 remap of the Opel Combo 1.3 CDTI 75 hp include?
Stage 1 on the Opel Combo 1.3 CDTI 75 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is Stage 1 safe for the low-output Opel Combo 1.3 CDTI 75 hp?
Yes, Stage 1 on the low-output Opel Combo 1.3 CDTI 75 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
How does Stage 2 differ from Stage 1 on the Opel Combo 1.3 CDTI 75 hp?
Stage 2 for the Opel Combo 1.3 CDTI 75 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Opel Combo 1.3 CDTI 75 hp have?
The Opel Combo 1.3 CDTI 75 hp has 3 ECU variants: Bosch EDC17C18, Bosch EDC17C19, Bosch EDC17C59. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Opel Combo?
Stage 1 on the Opel Combo voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Opel Combo 1.3 CDTI 75 hp done?
The full remap cycle for the Opel Combo — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Opel Combo?
The original Opel Combo ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Opel Combo 1.3 CDTI 75 hp?
The cost of Stage 1 for the Opel Combo 1.3 CDTI 75 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.