Opel Adam 1.4 T 150 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Opel Adam 1.4 T 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Adam 1.4 T 150 hp ECU
Opel Adam (2012) 1.4 T 150 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 150 to 175 hp (+25 hp, +17%) and torque from 220 to 260 Nm (+40 Nm). This engine ships with different ECU variants: Delco E78, Delco E80. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2012 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Opel and Vauxhall (UK) are the same line-up under different names. Opel OPC is the performance division, producing high-output turbo versions. Opel shares platforms with Peugeot, Citroen and DS within Stellantis since 2017. PureTech is Citroen's badge for its turbo petrol engines. The Citroen petrol range is shared with Peugeot and Opel within Stellantis. Citroen turbo petrol engines deliver a noticeable gain with Stage 1.
On older-generation Opel models, Stage 1 is done via OBD without bench. The Opel community in Germany and the UK generates a large volume of Stage files. Older Opel models (pre-2017) share ECUs with Chevrolet, requiring a different toolset. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How many horsepower does the Opel Adam 1.4 T 150 hp reach after a remap?
The Stage 1 gain for the Opel Adam 1.4 T 150 hp is 25 hp (+17%) over the stock 150 hp, for a total of 175 hp. Torque rises from 220 to 260 Nm (+40 Nm).
What is Stage 1 chip tuning for the Opel Adam?
Stage 1 on the Opel Adam 1.4 T 150 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.4 T 150 hp?
Stage 1 on the Opel Adam 1.4 T 150 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Opel Adam 1.4 T 150 hp?
Stage 2 on the Opel Adam 1.4 T 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Opel Adam 1.4 T 150 hp have?
The Opel Adam 1.4 T 150 hp has 2 ECU variants: Delco E78, Delco E80. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Opel Adam?
Stage 1 on the Opel Adam voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Opel Adam 1.4 T 150 hp done?
The full remap cycle for the Opel Adam — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Opel Adam?
The original Opel Adam ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Opel Adam 1.4 T 150 hp?
The cost of Stage 1 for the Opel Adam 1.4 T 150 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.