Opel Adam 1.2 Twinport 69 hp — Stage 1 file (+5 hp)
hp
Stage 1 file for Opel Adam 1.2 Twinport 69 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Adam 1.2 Twinport 69 hp ECU
Opel Adam (2012) 1.2 Twinport 69 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 69 to 74 hp (+5 hp, +7%) and torque from 115 to 125 Nm (+10 Nm). A petrol engine built in 2012 — a Tricore platform without strong protection; OBD access works.
Opel OPC is the performance division, producing high-output turbo versions. Opel shares platforms with Peugeot, Citroen and DS within Stellantis since 2017. Before 2017, Opel shared platforms with Chevrolet and Buick as part of GM. The Citroen petrol range is shared with Peugeot and Opel within Stellantis. Low-output Citroen petrol engines are naturally aspirated city units, so the gain is modest. PureTech is Citroen's badge for its turbo petrol engines.
Within Stellantis, ECUs are standardised, so Opel files (from 2017 on) often work on Peugeot/Citroen. The Opel community in Germany and the UK generates a large volume of Stage files. On older-generation Opel models, Stage 1 is done via OBD without bench. On naturally aspirated Citroen engines, the main effect is on throttle response. Low-output Citroen engines are city units, and Stage 1 is safe.
Frequently asked questions
What is the Stage 1 effect on the Opel Adam 1.2 Twinport 69 hp?
Stage 1 chip tuning on the Opel Adam 1.2 Twinport 69 hp boosts engine output by 5 hp: from 69 to 74 hp. Torque rises from 115 to 125 Nm (+10 Nm).
What changes in the Opel Adam ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Opel Adam with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +5 hp with no hardware changes.
Is Stage 1 worth doing on the base Opel Adam?
Yes, Stage 1 on the low-output Opel Adam 1.2 Twinport 69 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Opel Adam 1.2 Twinport 69 hp?
Stage 2 for the Opel Adam 1.2 Twinport 69 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Opel Adam remain valid after Stage 1?
After remapping the Opel Adam, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Opel Adam?
Reading and writing via OBD takes 25-30 minutes on the Opel Adam. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Opel Adam?
Before Stage 1 the original of the Opel Adam 1.2 Twinport 69 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Opel Adam 1.2 Twinport 69 hp cost?
The remap price for the Opel Adam 1.2 Twinport 69 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.