Opel Adam 1.0 T EcoTec 115 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Opel Adam 1.0 T EcoTec 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Adam 1.0 T EcoTec 115 hp ECU
Opel Adam (2012) 1.0 T EcoTec 115 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 115 to 130 hp (+15 hp, +13%) and torque from 166 to 220 Nm (+54 Nm). ECU — Delco E80. Flashing method: OBD or Bench depending on the unit's protection. A petrol engine built in 2012 — a Tricore platform without strong protection; OBD access works.
Before 2017, Opel shared platforms with Chevrolet and Buick as part of GM. Opel is a German carmaker from Russelsheim, founded in 1862 (originally making sewing machines). Opel has been part of the Stellantis group since 2017 (formerly GM Europe). PureTech is Citroen's badge for its turbo petrol engines. The Citroen petrol range is shared with Peugeot and Opel within Stellantis. Citroen turbo petrol engines deliver a noticeable gain with Stage 1.
On Opel petrol engines, Stage 1 delivers a noticeable gain. Within Stellantis, ECUs are standardised, so Opel files (from 2017 on) often work on Peugeot/Citroen. On older-generation Opel models, Stage 1 is done via OBD without bench. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
What is the Stage 1 effect on the Opel Adam 1.0 T EcoTec 115 hp?
Stage 1 chip tuning on the Opel Adam 1.0 T EcoTec 115 hp boosts engine output by 15 hp: from 115 to 130 hp. Torque rises from 166 to 220 Nm (+54 Nm).
What changes in the Opel Adam ECU after Stage 1?
Stage 1 on the Opel Adam 1.0 T EcoTec 115 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +15 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.0 T EcoTec 115 hp?
Stage 1 on the Opel Adam 1.0 T EcoTec 115 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Opel Adam 1.0 T EcoTec 115 hp?
Stage 2 for the Opel Adam 1.0 T EcoTec 115 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Opel Adam 1.0 T EcoTec 115 hp run?
The control unit of the Opel Adam 1.0 T EcoTec 115 hp is the Delco E80. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Opel Adam?
Stage 1 on the Opel Adam voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Opel Adam 1.0 T EcoTec 115 hp done?
The full remap cycle for the Opel Adam — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Opel Adam?
The original Opel Adam ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Opel Adam 1.0 T EcoTec 115 hp?
The cost of Stage 1 for the Opel Adam 1.0 T EcoTec 115 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.