Nissan Qashqai 2.0 DCI 150 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Nissan Qashqai 2.0 DCI 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Nissan Qashqai 2.0 DCI 150 hp ECU
Nissan Qashqai (2006 - I) 2.0 DCI 150 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Япония, 1933). Stage 1 chip tuning raises power from 150 to 185 hp (+35 hp, +23%) and torque from 340 to 400 Nm (+60 Nm). ECU — Bosch EDC16CP33. Flashing method: OBD or Bench depending on the unit's protection. Diesel engines built in 2006 — the era of classic Common Rail without strong encryption.
Nismo is Nissan's performance division, producing tuned versions. The GT-R is Nissan's iconic sports model, legendary in JDM culture. Nissan shares some engines and platforms with Renault and Mitsubishi. Mid-range Nissan diesels are a high-volume chip tuning subject. DPF/SCR with AdBlue is standard on Euro-6 Nissan diesels. Nissan has its own diesels for commercial vehicles (Navara, NV).
Stage 1 on Nissan diesels delivers a noticeable torque gain. The Nissan community in the JDM segment is the world's largest for the GT-R. The GT-R community is an industry of its own with ready-made Stage files. Mid-range Nissans form the backbone of the range, and Stage 1 preserves engine life.
Frequently asked questions
How much does the power of the Nissan Qashqai 2.0 DCI 150 hp increase after Stage 1?
Stage 1 for the Nissan Qashqai 2.0 DCI 150 hp adds +35 hp — power increases from 150 to 185 hp (+23%). Torque rises from 340 to 400 Nm (+60 Nm).
What does a Stage 1 remap of the Nissan Qashqai 2.0 DCI 150 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Nissan Qashqai with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Nissan Qashqai 2.0 DCI 150 hp?
A remap of the Nissan Qashqai 2.0 DCI 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Nissan Qashqai 2.0 DCI 150 hp?
Stage 2 for the Nissan Qashqai 2.0 DCI 150 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Nissan Qashqai 2.0 DCI 150 hp use?
The Nissan Qashqai 2.0 DCI 150 hp is fitted with the Bosch EDC16CP33 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Nissan Qashqai remain valid after Stage 1?
After remapping the Nissan Qashqai, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Nissan Qashqai?
Reading and writing via OBD takes 25-30 minutes on the Nissan Qashqai. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Nissan Qashqai?
Before Stage 1 the original of the Nissan Qashqai 2.0 DCI 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Nissan Qashqai 2.0 DCI 150 hp cost?
The remap price for the Nissan Qashqai 2.0 DCI 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.