Nissan Primera 1.9 DCI 115 hp — Stage 1 file (+45 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Nissan Primera 1.9 DCI 115 hp ECU

Nissan Primera (2002) 1.9 DCI 115 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Япония, 1933). Stage 1 chip tuning raises power from 115 to 160 hp (+45 hp, +39%) and torque from 270 to 310 Nm (+40 Nm). ECU — Bosch EDC16C36. Flashing method: OBD or Bench depending on the unit's protection. The 2002 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.

Nissan is a Japanese carmaker from Yokohama, founded in 1933. Nissan is part of the Renault-Nissan-Mitsubishi Alliance. Infiniti is Nissan's premium sub-brand for North America and the Middle East. Nissan uses Renault dCi diesels on its European passenger-car models. Mid-range Nissan diesels are a high-volume chip tuning subject. DPF/SCR with AdBlue is standard on Euro-6 Nissan diesels.

Stage 1 on Nissan diesels delivers a noticeable torque gain. The Nissan community in the JDM segment is the world's largest for the GT-R. The GT-R community is an industry of its own with ready-made Stage files. Mid-range Nissans form the backbone of the range, and Stage 1 preserves engine life.

Frequently asked questions

How much does the power of the Nissan Primera 1.9 DCI 115 hp increase after Stage 1?

After Stage 1 the power of the Nissan Primera 1.9 DCI 115 hp rises from 115 to 160 hp, a gain of 45 hp (+39%). Torque rises from 270 to 310 Nm (+40 Nm).

How does Stage 1 differ from stock on the Nissan Primera?

Stage 1 is a software optimization of the factory ECU firmware of the Nissan Primera with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +45 hp with no hardware changes.

What is the risk of Stage 1 on the Nissan Primera 1.9 DCI 115 hp?

A remap of the Nissan Primera 1.9 DCI 115 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.

What is Stage 2 for the Nissan Primera 1.9 DCI 115 hp?

Stage 2 on the Nissan Primera 1.9 DCI 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

What ECU platform does the Nissan Primera 1.9 DCI 115 hp use?

The Nissan Primera 1.9 DCI 115 hp is fitted with the Bosch EDC16C36 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.

Does the factory warranty of the Nissan Primera remain valid after Stage 1?

After remapping the Nissan Primera, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.

How long is the wait for a Stage 1 remap for the Nissan Primera?

Reading and writing via OBD takes 25-30 minutes on the Nissan Primera. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.

How do you roll back to the factory firmware of the Nissan Primera?

Before Stage 1 the original of the Nissan Primera 1.9 DCI 115 hp is read out and saved — returning to the factory state is possible at any time.

How much does chip tuning the Nissan Primera 1.9 DCI 115 hp cost?

The remap price for the Nissan Primera 1.9 DCI 115 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno