Nissan NV 200 1.5 DCI 8v EU4 90 hp — Stage 1 file (+20 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Nissan NV 200 1.5 DCI 8v EU4 90 hp ECU

Nissan NV 200 (2009) 1.5 DCI 8v EU4 90 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Япония, 1933). Stage 1 chip tuning raises power from 90 to 110 hp (+20 hp, +22%) and torque from 220 to 240 Nm (+20 Nm). ECU — Delphi DCM3.4. Flashing method: OBD or Bench depending on the unit's protection. The 2009 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.

Nissan is a Japanese carmaker from Yokohama, founded in 1933. Nissan is part of the Renault-Nissan-Mitsubishi Alliance. Infiniti is Nissan's premium sub-brand for North America and the Middle East. Nissan has its own diesels for commercial vehicles (Navara, NV). DPF/SCR with AdBlue is standard on Euro-6 Nissan diesels. Nissan uses Renault dCi diesels on its European passenger-car models.

The Nissan community in the JDM segment is the world's largest for the GT-R. The GT-R community is an industry of its own with ready-made Stage files. Low-output Nissans are naturally aspirated city cars, and Stage 1 is safe on them.

Frequently asked questions

How much does the power of the Nissan NV 200 1.5 DCI 8v EU4 90 hp increase after Stage 1?

The Stage 1 gain for the Nissan NV 200 1.5 DCI 8v EU4 90 hp is 20 hp (+22%) over the stock 90 hp, for a total of 110 hp. Torque rises from 220 to 240 Nm (+20 Nm).

What is Stage 1 chip tuning for the Nissan NV 200?

Stage 1 is a software optimization of the factory ECU firmware of the Nissan NV 200 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.

Is Stage 1 worth doing on the base Nissan NV 200?

Stage 1 on the base Nissan NV 200 is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.

What is Stage 2 for the Nissan NV 200 1.5 DCI 8v EU4 90 hp?

Stage 2 on the Nissan NV 200 1.5 DCI 8v EU4 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

What ECU platform does the Nissan NV 200 1.5 DCI 8v EU4 90 hp use?

The Nissan NV 200 1.5 DCI 8v EU4 90 hp is fitted with the Delphi DCM3.4 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.

Does the factory warranty of the Nissan NV 200 remain valid after Stage 1?

After remapping the Nissan NV 200, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.

How long is the wait for a Stage 1 remap for the Nissan NV 200?

Reading and writing via OBD takes 25-30 minutes on the Nissan NV 200. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.

How do you roll back to the factory firmware of the Nissan NV 200?

Before Stage 1 the original of the Nissan NV 200 1.5 DCI 8v EU4 90 hp is read out and saved — returning to the factory state is possible at any time.

How much does chip tuning the Nissan NV 200 1.5 DCI 8v EU4 90 hp cost?

The remap price for the Nissan NV 200 1.5 DCI 8v EU4 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.

Last updated: 30.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno