Nissan Navara 3.0 DCI 231 hp — Stage 1 file (+39 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Nissan Navara 3.0 DCI 231 hp ECU

Nissan Navara (2005 - D40) 3.0 DCI 231 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Япония, 1933). Stage 1 chip tuning raises power from 231 to 270 hp (+39 hp, +17%) and torque from 550 to 600 Nm (+50 Nm). ECU — Bosch EDC16CP42. Flashing method: OBD or Bench depending on the unit's protection. The 2005 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.

Infiniti is Nissan's premium sub-brand for North America and the Middle East. Nismo is Nissan's performance division, producing tuned versions. The GT-R is Nissan's iconic sports model, legendary in JDM culture. Nissan uses Renault dCi diesels on its European passenger-car models. High-output Nissan diesels power the commercial-segment Patrol and Navara. DPF/SCR with AdBlue is standard on Euro-6 Nissan diesels.

The Nissan community in the JDM segment is the world's largest for the GT-R. The GT-R community is an industry of its own with ready-made Stage files. High-output Nissan models deliver a solid gain with Stage 1.

Frequently asked questions

What is the Stage 1 effect on the Nissan Navara 3.0 DCI 231 hp?

After Stage 1 the power of the Nissan Navara 3.0 DCI 231 hp rises from 231 to 270 hp, a gain of 39 hp (+17%). Torque rises from 550 to 600 Nm (+50 Nm).

How does Stage 1 differ from stock on the Nissan Navara?

Stage 1 on the Nissan Navara 3.0 DCI 231 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +39 hp with no hardware changes.

What does Stage 1 give on the powerful Nissan Navara 3.0 DCI 231 hp?

The high-output Nissan Navara 3.0 DCI 231 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.

How does Stage 2 differ from Stage 1 on the Nissan Navara 3.0 DCI 231 hp?

Stage 2 on the Nissan Navara 3.0 DCI 231 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

What control unit does the Nissan Navara 3.0 DCI 231 hp run?

The control unit of the Nissan Navara 3.0 DCI 231 hp is the Bosch EDC16CP42. Before flashing, the engineer identifies the exact revision and selects the write method.

Does Stage 1 void the warranty on the Nissan Navara?

Stage 1 on the Nissan Navara voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Nissan Navara 3.0 DCI 231 hp done?

The full remap cycle for the Nissan Navara — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Nissan Navara?

The original Nissan Navara ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Nissan Navara 3.0 DCI 231 hp?

The cost of Stage 1 for the Nissan Navara 3.0 DCI 231 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno