Nissan Micra 1.0i 71 hp — Stage 1 file (+4 hp)
hp
Stage 1 file for Nissan Micra 1.0i 71 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Nissan Micra 1.0i 71 hp ECU
Nissan Micra (2020) 1.0i 71 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Япония, 1933). Stage 1 chip tuning raises power from 71 to 75 hp (+4 hp, +6%) and torque from 97 to 100 Nm (+3 Nm). This engine ships with different ECU variants: Siemens/Continental EMS3125, Bosch ME17.9.20. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 2 ECU variants. A 2020 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Nismo is Nissan's performance division, producing tuned versions. The GT-R is Nissan's iconic sports model, legendary in JDM culture. Nissan shares some engines and platforms with Renault and Mitsubishi. The GT-R is Nissan's flagship supercar with a BiTurbo V6. Nismo is Nissan's performance division, the equivalent of AMG/M. Nissan's petrol range covers mainstream turbocharged and naturally aspirated engines.
Modern Nissans often require a Bench read. The Nissan community in the JDM segment is the world's largest for the GT-R. The GT-R community is an industry of its own with ready-made Stage files. Low-output Nissans are naturally aspirated city cars, and Stage 1 is safe on them.
Frequently asked questions
How much horsepower does Stage 1 add for the Nissan Micra 1.0i 71 hp?
Stage 1 chip tuning on the Nissan Micra 1.0i 71 hp boosts engine output by 4 hp: from 71 to 75 hp. Torque rises from 97 to 100 Nm (+3 Nm).
What changes in the Nissan Micra ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Nissan Micra with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +4 hp with no hardware changes.
Is Stage 1 worth doing on the base Nissan Micra?
Yes, Stage 1 on the low-output Nissan Micra 1.0i 71 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Nissan Micra 1.0i 71 hp?
Stage 2 for the Nissan Micra 1.0i 71 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Nissan Micra 1.0i 71 hp built with?
The Nissan Micra 1.0i 71 hp comes with 2 ECU variants: Siemens/Continental EMS3125, Bosch ME17.9.20. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Nissan Micra remain valid after Stage 1?
After remapping the Nissan Micra, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Nissan Micra?
Reading and writing via OBD takes 25-30 minutes on the Nissan Micra. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Nissan Micra?
Before Stage 1 the original of the Nissan Micra 1.0i 71 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Nissan Micra 1.0i 71 hp cost?
The remap price for the Nissan Micra 1.0i 71 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.