Nissan Micra 0.9 TCE 90 hp — Stage 1 file (+15 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Nissan Micra 0.9 TCE 90 hp ECU

Nissan Micra (2016) 0.9 TCE 90 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Япония, 1933). Stage 1 chip tuning raises power from 90 to 105 hp (+15 hp, +17%) and torque from 135 to 165 Nm (+30 Nm). This engine ships with different ECU variants: Siemens/Continental EMS3125, Siemens/Continental EMS3140, Siemens/Continental EMS3150, Valeo V50.1. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 4 ECU variants. A petrol engine built in 2016 — a Tricore platform without strong protection; OBD access works.

Nissan shares some engines and platforms with Renault and Mitsubishi. Nissan is a Japanese carmaker from Yokohama, founded in 1933. Nissan is part of the Renault-Nissan-Mitsubishi Alliance. Nissan's petrol range covers mainstream turbocharged and naturally aspirated engines. The GT-R is Nissan's flagship supercar with a BiTurbo V6. Nismo is Nissan's performance division, the equivalent of AMG/M.

The GT-R community is an industry of its own with ready-made Stage files. The Nissan community in the JDM segment is the world's largest for the GT-R. Low-output Nissans are naturally aspirated city cars, and Stage 1 is safe on them.

Frequently asked questions

How much horsepower does Stage 1 add for the Nissan Micra 0.9 TCE 90 hp?

Stage 1 for the Nissan Micra 0.9 TCE 90 hp adds +15 hp — power increases from 90 to 105 hp (+17%). Torque rises from 135 to 165 Nm (+30 Nm).

What does a Stage 1 remap of the Nissan Micra 0.9 TCE 90 hp include?

Stage 1 on the Nissan Micra 0.9 TCE 90 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +15 hp with no hardware changes.

Is Stage 1 safe for the low-output Nissan Micra 0.9 TCE 90 hp?

Yes, Stage 1 on the low-output Nissan Micra 0.9 TCE 90 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.

How does Stage 2 differ from Stage 1 on the Nissan Micra 0.9 TCE 90 hp?

Stage 2 for the Nissan Micra 0.9 TCE 90 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.

How many ECU variants does the Nissan Micra 0.9 TCE 90 hp have?

The Nissan Micra 0.9 TCE 90 hp has 4 ECU variants: Siemens/Continental EMS3125, Siemens/Continental EMS3140, Siemens/Continental EMS3150, Valeo V50.1. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.

Does Stage 1 void the warranty on the Nissan Micra?

Stage 1 on the Nissan Micra voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Nissan Micra 0.9 TCE 90 hp done?

The full remap cycle for the Nissan Micra — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Nissan Micra?

The original Nissan Micra ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Nissan Micra 0.9 TCE 90 hp?

The cost of Stage 1 for the Nissan Micra 0.9 TCE 90 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno