Nissan Juke 1.6T Nismo 214 hp — Stage 1 file (+16 hp)
hp
Stage 1 file for Nissan Juke 1.6T Nismo 214 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Nissan Juke 1.6T Nismo 214 hp ECU
Nissan Juke (2010) 1.6T Nismo 214 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Япония, 1933). Stage 1 chip tuning raises power from 214 to 230 hp (+16 hp, +7%) and torque from 250 to 300 Nm (+50 Nm). ECU — Hitachi BEDxxx/MECxxx. Flashing method: OBD or Bench depending on the unit's protection. The 2010 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Nissan is a Japanese carmaker from Yokohama, founded in 1933. Nissan is part of the Renault-Nissan-Mitsubishi Alliance. Infiniti is Nissan's premium sub-brand for North America and the Middle East. Nismo is Nissan's performance division, the equivalent of AMG/M. The GT-R is Nissan's flagship supercar with a BiTurbo V6. Nissan's petrol range covers mainstream turbocharged and naturally aspirated engines.
The Nissan community in the JDM segment is the world's largest for the GT-R. The GT-R community is an industry of its own with ready-made Stage files. High-output Nissan models deliver a solid gain with Stage 1.
Frequently asked questions
How many horsepower does the Nissan Juke 1.6T Nismo 214 hp reach after a remap?
The Stage 1 gain for the Nissan Juke 1.6T Nismo 214 hp is 16 hp (+7%) over the stock 214 hp, for a total of 230 hp. Torque rises from 250 to 300 Nm (+50 Nm).
What is Stage 1 chip tuning for the Nissan Juke?
Stage 1 is a software optimization of the factory ECU firmware of the Nissan Juke with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +16 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Nissan Juke?
The high-output Nissan Juke 1.6T Nismo 214 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Nissan Juke 1.6T Nismo 214 hp?
Stage 2 on the Nissan Juke 1.6T Nismo 214 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Nissan Juke 1.6T Nismo 214 hp use?
The Nissan Juke 1.6T Nismo 214 hp is fitted with the Hitachi BEDxxx/MECxxx ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Nissan Juke remain valid after Stage 1?
After remapping the Nissan Juke, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Nissan Juke?
Reading and writing via OBD takes 25-30 minutes on the Nissan Juke. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Nissan Juke?
Before Stage 1 the original of the Nissan Juke 1.6T Nismo 214 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Nissan Juke 1.6T Nismo 214 hp cost?
The remap price for the Nissan Juke 1.6T Nismo 214 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.