Nissan Cabstar 2.5 DCI 110 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Nissan Cabstar 2.5 DCI 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Nissan Cabstar 2.5 DCI 110 hp ECU
Nissan Cabstar (2004) 2.5 DCI 110 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Япония, 1933). Stage 1 chip tuning raises power from 110 to 160 hp (+50 hp, +45%) and torque from 270 to 340 Nm (+70 Nm). This engine ships with different ECU variants: Denso DIESEL SH705x NIS, Bosch EDC16C36. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2004 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Infiniti is Nissan's premium sub-brand for North America and the Middle East. Nismo is Nissan's performance division, producing tuned versions. The GT-R is Nissan's iconic sports model, legendary in JDM culture. Nissan uses Renault dCi diesels on its European passenger-car models. Mid-range Nissan diesels are a high-volume chip tuning subject. DPF/SCR with AdBlue is standard on Euro-6 Nissan diesels.
The GT-R community is an industry of its own with ready-made Stage files. Stage 1 on Nissan diesels delivers a noticeable torque gain. The Nissan community in the JDM segment is the world's largest for the GT-R. Mid-range Nissans form the backbone of the range, and Stage 1 preserves engine life.
Frequently asked questions
How many horsepower does the Nissan Cabstar 2.5 DCI 110 hp reach after a remap?
After Stage 1 the power of the Nissan Cabstar 2.5 DCI 110 hp rises from 110 to 160 hp, a gain of 50 hp (+45%). Torque rises from 270 to 340 Nm (+70 Nm).
How does Stage 1 differ from stock on the Nissan Cabstar?
Stage 1 on the Nissan Cabstar 2.5 DCI 110 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +50 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.5 DCI 110 hp?
Stage 1 on the Nissan Cabstar 2.5 DCI 110 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Nissan Cabstar 2.5 DCI 110 hp?
Stage 2 on the Nissan Cabstar 2.5 DCI 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Nissan Cabstar 2.5 DCI 110 hp have?
The Nissan Cabstar 2.5 DCI 110 hp has 2 ECU variants: Denso DIESEL SH705x NIS, Bosch EDC16C36. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Nissan Cabstar?
Stage 1 on the Nissan Cabstar voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Nissan Cabstar 2.5 DCI 110 hp done?
The full remap cycle for the Nissan Cabstar — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Nissan Cabstar?
The original Nissan Cabstar ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Nissan Cabstar 2.5 DCI 110 hp?
The cost of Stage 1 for the Nissan Cabstar 2.5 DCI 110 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.